Download Print this page

Fotodiox Prizmo Jupiter I 8 User Manual page 5

Rgbwt light

Advertisement

LED STUDIO LIGHT
4.Installing the AC power adapter
(1) The V-lock mount is pre-installed on the AC power adapter.
(2) Install the power adapter with V-lock plate on the back of the light. It is successfully installed when you hear the lock
mechanism click.
(3) To remove the adapter, press down on the V-lock release button and push the adapter out of the V-lock plate.
JUPITER 18
R
w w w . f o t o d i o x p r o . c o m
Attaching the adapter
5.Connecting the power supply
(1) Insert the 4-pin XLR plug output from the AC power adapter into the 4-pin XLR socket on the lower left corner
of the control panel. Attach the power cord to the AC power adapter.
(2) Connect the AC power adapter to the external AC power (AC100V-240V) You will now be able to power your
light and view real-time data on the LCD display.
6.Battery Power
This product can be powered by an external battery attached to the product's built in V-lock plate.
battery (sold separately) into the V-lock plate. To remove the battery, press the release button and slide the battery
out in the opposite direction.
Note: The PZM-700R operates on 1 battery with an output power of 150W or more.
power the light, the maximum output power is reduced to 80%.
7
JUPITER 18
R
w w w . f o t o d i o x p r o . c o m
Removing the adapter
JUPITER 18
R
w w w . f o t o d i o x p r o . c o m
Insert your V-lock
When the battery is used to
JUPITER 18
R
w w w . f o t o d i o x p r o . c o m
LED STUDIO LIGHT
Functions of the control knobs:
1.Selector Knob:
Selector Knob
Rotate the selector knob to select the desired mode in the menu, press once to select.
In certain modes, parameters such as CCT, CMB, SPD, and Frq may be adjusted using this knob.
In HSI, CCT, RGBWT mode, press the knob for several seconds to save the current settings.
2.Saturation Knob:
SAT 0-100%
In the HSI mode, SAT can be adjusted 0-100%. In other modes,
parameters such as SAT, CMB, Col, may be adjusted using this knob.
3.Intensity knob:
Brightness 0-100%
Adjusts brightness from 0-100% in any mode (0-80% when using battery power)
8

Advertisement

loading

This manual is also suitable for:

Pzm-700r