Related Manuals for Haier HR-45
Summary of Contents for Haier HR-45
- Page 1 The manufacturer keeps on developing various types of refrigerators, so he has the right to modify designs, products and technical data without further notice. MODEL HR-45 REFRIGERATOR OPERATING INSTRUCTIONS...
-
Page 2: Main Technical Data
MAIN TECHNICAL DATA Model Climate class Capacity Voltage Watt Energy consumption Refrigerant Overall dimension(D x W x H) Ice-tray Bottle retainer Evaporator Drip tray 460 x 475 x 490 (mm) Door gasket HR-50 HR-45 220V, 50Hz 0.50kW h/24h R134a 32g... - Page 3 NOTICE The power supply for appliance is 220V,50Hz single phase. It is not recommended to use any extension cords. Connect the appliance with a properly earthed three-wire plug and socket with a special use. SETTING UP The appliance can’t be placed with its rear panel directly against the wall.
-
Page 4: Storing Food
Pos. “1”,Pos. “4”.Pos, “0” shows the power is cut off. STORING FOOD The temperatures in different positions inside the refrigerator are different due to different refrigeration distribution.Thus when store food, select proper position to meet your needs. -
Page 5: Notes On Storage
NOTES ON STORAGE Where necessary, food should be packed in bags, avoiding giving off strong odours or getting wet or dry. Hot food or liquid must be allowed to cool to room temperature before placing in it. CLEANING The appliance can only be cleaned at drawn network plug. Clean it with lukewarm water containing a little detergent. - Page 6 DEFROSTING NOTES If the appliance remains out of use for some time, pull out the plug to disconnect the appliance from power supply. Clean the interior as described above to prevent odours from forming inside. When defrosting, switch off the appliance. Remove food from the ice chamber,it will be defrosted automatically.When defrosting process has been...
- Page 7 In the event of a fault occurring during operation, check first if the fault is due to an operation error. You can repair the following faults yourself. The appliance does not run. The temperature inside the appliance is not low enough. Excessive noise from the appliance.
- Page 8 WARNING: If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. The plug should be accessible after the appliance positioned.