Rainier KESTREL Assembly

TOOLS
We recommend you source and prep your tools before heading
to your site. In addition, be sure to have hard hats and fi rst aid
materials on hand.
Assemble the Door Frame
1.
Locate the four (4) pieces for the frame:
 1x Header - curved with rafter brackets on top
 1x Footer - curved without rafter brackets
 2x Vertical sections
2.
Assemble door frame with provided screws using 1x "L" bracket
at each corner. Nuts should go outside of frame.
3. Stand door frame upright.
Attaching the Lattice
1. Lay lattice on the ground. Each person should grasp one side of the lattice wall and move outwards, elongating
the lattice until it measures 5'5" from top to bottom.
2.
With each person grasping the lattice about one-third of the way in, stand the lattice upright.
3.
Attach one end of lattice to door
frame where it connects to an
aluminum "L" bracket at the door. The
brackets will line up with the X's on
the end of the lattice.
Use the smaller white zip-ties to
attach the door frame.
KESTREL ASSEMBLY
4.
Take the tension strap
and insert in between
each "X" along the top of
the lattice.
Secure the band as
shown with the cam
buckle, and tension from
where the strap changes
from white to black.