Advertisement
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Warning:
Carefully read the information and instructions stated within this operation manual and make
sure to familiarise yourself with the tool, its functions, and handling before it is used. Non-compliance to
the instructions given within this manual may lead to severe injuries and property damage.
Note that this operation manual cannot possibly cover all the potential scenarios that could occur while
working with the tool. Therefore, make sure to be careful and attentive and to use it with discernment.
Safety instructions
General safety instructions
This tool must not be used by individuals with reduced physical, sensory, or mental capabilities,
•
or lack of experience and/or knowledge.
This tool can only be used by individuals that are familiar with the tool as well as the information
•
and instructions found within this operation manual.
Children are not allowed to use the tool and must be always supervised to ensure that they do
•
not play with it.
Do not modify the tool. Unauthorised modifications can impair the safety, functionality, and ser-
•
vice life of the tool.
Always use tools appropriate for the task at hand. Further ensure to only use tools for the pur-
•
pose they are intended for and at a speed that corresponds to their specifications.
Workplace safety
Always make sure to keep your work area dry, clean, and well-lit. Wet, cluttered or insufficiently
•
lit work areas increase the risk of accidents.
Ensure that your work area offers enough space to grant a sufficiently safe distance from cutting
•
tools.
Keep bystanders out of the work area while using the tool as distractions may lead to careless-
•
ness and cause severe injuries.
Personal safety
Always stay vigilant while using this tool and do not use it, if you are exhausted, tired, or under
•
the influence of alcohol, drugs, or medicine.
Do not wear lose clothes or accessories that may be gripped by moving parts. Tie long hair up
•
or cover it with a snood-type cap to avoid severe injuries.
Always wear appropriate safety equipment consisting of work gloves and non-skid safety shoes
•
when working with this tool. It is further advised to wear a safety helmet, ear protection as well
as authorised safety goggles, if saws and other tools are going to be used.
•
Do not overestimate yourself and do not take unnecessary risks. Always make sure to have a
secure foothold.
https://www.XPOtool.com
The Tool Experts
Item 62367
3
Page
05 2022-1
Advertisement
