Power Supply - ARRI ALEXA 35 Operating Manual

Mounting and Assembly
Bottom Attachment Points
Side Attachment Points
5.2

Power Supply

Improper handling of cables
Risk of damage to the camera system.
Operate the system using only the type of power source indicated in this document.
Always unplug the power cable by gripping the power plug, not the cable.
Do not supply power outside the specified voltage range.
Always keep the PWR connector accessible so that the cable can be unplugged quickly in case
of emergency.
Do not use power cables longer than 4m.
Always properly secure cables connected to the camera to avoid pinching or tripping.
The camera accepts an input voltage range from 20.5 to 33.6 V DC and can be powered through the
PWR connector or through the BAT interface on the camera rear using a battery adapter and a suitable
onboard battery.
The three attachment points on the camera bottom
(3, 4) are used to attach the Balance Utility Dovetail
BUD-1 (K2.0034180).
Use a 3.0 mm Allen/hex key to attach the Balance Utili-
ty Dovetail. Tighten screws crosswise.
The camera is equipped with two accessory attach-
ment points (5) each on the camera left and the cam-
era right side to attach
Camera Side Bracket CSB-1L (K2.0033573)
Camera Side Bracket CSB-1R (K2.0033571)
Use a 3.0 mm Allen/hex key to attach the side brack-
ets. Tighten screws crosswise.
NOTICE
26