Related Manuals for Logia LOWSB315B
Summary of Contents for Logia LOWSB315B
- Page 1 ™ 3-IN-1 RAIN SENSOR AND LCD DISPLAY WITH BUILT-IN HYGRO-THERMO SENSOR USER GUIDE LOWSB315B...
-
Page 2: Table Of Contents
Thank you for purchasing the Logia 3-in-1 Rain Sensor and LCD Display with Built-In Hygro-Thermo Sensor. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. -
Page 3: Safety Precautions
SAFETY PRECAUTIONS WARNING! Please read and understand all safety precautions, operating instructions, and care/maintenance instructions before operating this appliance. Keep this manual for future reference. • This product is not a toy. Keep out of the reach of children. • This product is designed for use in the home only as an indication of weather conditions. -
Page 4: Product Features
PRODUCT FEATURES • Wireless 3-in-1 rain sensor measures rainfall and outdoor temperature. • Console measures indoor temperature and humidity with built-in sensors. • No calibration needed! The product is fully pre-calibrated and mostly assembled; all you need to do is install it and sync with the included display console. -
Page 5: Product Overview
WEATHER CONSOLE OVERVIEW C&A Marketing Inc. Model No.:LOWSB315B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 6 RAIN SENSOR OVERVIEW 1. Radiation shield 6. Drain holes 2. Red LED indicator 7. Tipping bucket 3. Mounting base 8. Rain sensor 4. Mounting clamp 9. RESET button 5. Rain collector 10. Battery compartment...
- Page 7 LCD DISPLAY OVERVIEW Time/Calendar Display 1. SINCE icon 4. DST icon 7. Alarm mode 2. HISTORY icon 5. Ice-alert icon 8. Alarm icon 3. Time 6. Day of the week 9. Calendar Rainfall Display 1. Rainfall indicator 4. Time range record indicator 7.
- Page 8 Outdoor Temperature Display 1. Outdoor indicator 3. Outdoor temperature 5. Outdoor signal strength indicator 2. MAX/MIN indicator 4. Low battery indicator for sensor 6. HI/LO alert and alarm Indoor Temperature/Humidity Display 1. Indoor indicator 4. Indoor temperature 6. HI/LO alert and alarm for humidity 2.
-
Page 9: Installation Instructions
INSTALLATION INSTRUCTIONS SETTING UP THE 3-IN-1 RAIN SENSOR The 3-in-1 rain sensor measures rainfall and temperature for you. Installing the Batteries Unscrew the battery door at the bottom of the rain sensor using a screwdriver (not included). Insert four (4) AA batteries (not included) according to the +/- polarity labeled in the compartment. - Page 10 SETTING UP THE DISPLAY CONSOLE The console can be set up on a table or mounted up on a wall. Installing the Batteries Remove the battery door on back of the console. Insert two (2) AA batteries (not included) into the compartment. Place the battery door back onto the compartment.
-
Page 11: Operating Instructions
OPERATING INSTRUCTIONS TIME & CALENDAR Manually Setting the Time The display console is designed to synchronize itself using the RCC signal, however you can set the time manually if needed. During initial setup, you will need to press and hold the RCC button for eight (8) seconds to deactivate RCC reception. - Page 12 Press the ALARM button to save and exit the menu. NOTE: The alarm icon will display on screen once the alarm time is set. Activating/Deactivating the Alarm & Temperature Pre-Alarm The temperature pre-alarm (alarm with ice-alert) will alert you 30 minutes prior to your alarm time whenever the outdoor temperature falls below 26.5 °F (-3 °C).
- Page 13 Set the Rainfall Units Use the MM/IN slider to select the measurement unit between mm or in. Graphical Histogram Display Histogram presents an easy view of rainfall change pattern over a period of time in a graphical manner. The time scale of the graph automatically changes according to the rainfall display modes: Rate > Hour >...
- Page 14 MAX/MIN MEMORY Press the MEM button to check MAX/MIN records. AREA Outdoor Indoor Indoor Humidity Hour/Day/Week/ Temperature Temperature Month/Year rainfall TYPE OF Max. Min. Max. Min. Max. Min. Max. MEMORY Clearing the MAX/MIN Records While the maximum or minimum readings are displayed, press and hold the MEM button for two (2) seconds to clear individual records.
- Page 15 Activating/Deactivating the HI/LO Alert Press the ALERT button until the desired area is selected. Press the ALARM button to turn the alert on or off. Press the ALERT button to continue to next setting. Silence the HI/LO Alert Alarm Press the SNOOZE/LIGHT button to silence the alarm, or it will automatically turn off after two (2) minutes.
-
Page 16: Care/Maintenance
CARE/MAINTENANCE CLEANING THE RAIN COLLECTOR Unscrew the rain collector by turning the rain collector counterclockwise. Gently remove the rain collector. Clean and remove any debris or insects from the rain collector. Install the rain collector when it is clean and fully dried. TROUBLESHOOTING Problem Solution... -
Page 17: Specifications
SPECIFICATIONS DISPLAY CONSOLE GENERAL SPECIFICATIONS Product type: Weather/environment sensor & console Dimensions (W x H x D): 3.7″ x 6.1″ x 0.9″ (95 x 155 x 23 mm) Weight: 0.5 lbs. (212 g) (without batteries) Power source: 2 x AA 1.5 V batteries Adult assembly required for console: Location use for console: Indoor use... - Page 18 Resolution: Display modes: Current, MAX/MIN, historical data for past 24 hours Memory modes: MAX & MIN from last memory reset Alarm HI/LO temperature alert WIRELESS 3-IN-1 OUTDOOR RAIN SENSOR GENERAL SPECIFICATIONS Dimensions (W x H x D): 4.3″ x 7.9″ x 4.3″ (109 x 200 x 109 mm) Weight: 0.8 lbs.
- Page 19 (g) Consumable parts, such as batteries, fuses, and bulbs; (h) Cosmetic damage; or (i) If any Logia 3-in-1 Rain Sensor and LCD Display with Built-In Hygro-Thermo Sensor serial number has been removed or defaced. This Warranty is valid only in the country where the consumer purchased the Product, and only applies to Products purchased and serviced in that country.
- Page 20 © 2021. C&A IP Holdings LLC. All Rights Reserved. If you experience any issues with your Logia 3-in-1 Rain Sensor and LCD Display with Built-In Hygro-Thermo Sensor, please contact us before returning your product to the place of purchase. We’re here to help! QUESTIONS OR PROBLEMS? CONTACT US! Email: info@supportcbp.com or call: 1-833-815-0568...