Description; Mounting - Window Master WOW 600 Manual

1. EN
1.1

Description

The weather station is a robust unit without any moving parts, it measures temperature, precipitation, relative humidity, wind speed
and direction. Furthermore, is it equipped with a GPS antenna for e.g., time registration / synchronization.
The weather station is supplied with a 20m connection cable incl. connection plug, which must be used.
The weather station is used together with WindowMaster MotorControllers WCC 3x0 Plus ver. x4 and smoke panels WSC 3x0 Plus
ver. E4 and WSC 5xx ver. E2.
WOW 600 is a customized version of the GMX600 from Gill Instruments.
Instructions for the GMX600 can be found on Gill Instruments home pages http://gillinstruments.com/.
WOW 600 does not detect snow, if snow detection is desired, the purchase of WLA 331 is recommended. For connection of WLA
331, please refer to the WLA 331 instruction manual or the instruction manual for the control panel.
The supplied cable and connector is a customized version and is mandatory for the WOW 600 to function on WindowMaster
MotorControllers / smoke panels.
1.2

Mounting

The weather station is mounted with the supplied brackets.
1. Mount the sensor on to the bracket mount.
2. Secure the sensor to its mount using the supplied screws and washers.
3. Torque screws to a max of 1.5Nm.
The bracket uses a mounting clamp for attaching to a vertical pipe/pole with a diameter of 30-58mm. Mount at the top of a pipe/pole
to ensure a clear unobstructed measurement view.
Note: The mounting pipe/pole should first be degreased and when assembling the bracket clamp the outer clamp nuts need to be
tightened evenly to a torque of 3Nm.
The moving plate part of the clamp needs to be reversed for pipes/poles below 38m diameter.
Screw an Earth cable minimum 6mm
Mounting bracket in anodized aluminium.
The weather station is supplied with mounting bolts in stainless steel and wall/pole
mounting kit, for mounting on a pole with a diameter of 30-58mm (1.2'' - 2.3'').
For best possible measurements, WindowMaster recommends placing the weather
station at least 2m above the highest point of the building.
2
to the bracket chassis using screw and terminal fixing supplied (see drawing above).
Attach Earth
cable here
3