Advertisement
4.2.
Take the guard and slide it into the brackets from above; the guard has a stop on either side at the top of the frame, this should be
uppermost and facing towards the operator fig.3.
Guard Stops
Uppermost
4.3.
Pull the locks back on either side and lower the guard all the way down.
CAUTION! The guard will drop freely until it reaches the stops.
4.4.
To raise the guard to one of the five height increments, pull up the guard and the spring loaded locking clips will snap into position at
the desired height.
.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.3
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
YKSG20, 30, 50, 75 Issue:2 (H,F) 07/04/22
Advertisement
