Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nira 67
Summary of Contents for Nira 67
- Page 1 NIRA 67 Playground pump Operating and maintenance manual 28.04.2014...
-
Page 2: Table Of Contents
Contents 1 NIRA 67 Playground pump ..........................3 1.1 Description of parts ..........................3 2 Introduction ..............................4 2.1 Inspection upon delivery.......................... 4 2.2 Before use ............................... 4 3 Using the pump ............................... 5 3.1 Installation ............................... 5 3.2 Taking the pump out of use ........................6 4 Maintenance and repair .......................... -
Page 3: Nira 67 Playground Pump
1 NIRA 67 Playground pump Nira 67 Playground pump is intended for children’s playgrounds. The pump is designed to be connected to a pipeline and therefore cannot be used for pumping water from ordinary water wells. This document gives instructions for operating and maintaining the device. Please familiarize yourself with these instructions before using the device. -
Page 4: Introduction
NIRA 67 Playground pump is intended to be used in children’s playgrounds and other places where the pump can be connected to a water pipe line instead of water wells. NIRA 67 Playground pump cannot be used for pumping water from water wells since it has no pumping mechanism. -
Page 5: Using The Pump
Pump body (1pc) with installed handle and valve The stand is available as a accessory. Tools needed for the installation: 13 mm spanner or adjustable spanner (1 pc) 10 mm hex key (Allen key) Copyright © Nira Pumps Oy, 2014 | 04/2014... -
Page 6: Taking The Pump Out Of Use
4. Turn the pump upside down so that the water can drain from the pump through the opening. 5. If the stand is used, place the cover in place (Figure 2 (4)) 6. Store the pump in warm and dry place. Copyright © Nira Pumps Oy, 2014 | 04/2014... -
Page 7: Maintenance And Repair
4 Maintenance and repair 4.1 Regular inspection NIRA Playground pump is a playground equipment. According to the EN 1176 regular inspections have to be made to ensure safe operation. Weekly inspections are recommended. If the screw (Figure 1(23)) comes loose do not try to tighten it. The screw must be removed and thread locker (e.g. -
Page 8: Changing The Rocker Shaft Bushes And Seals
2. Remove the pin (1) (Figure 9). 3. The piston rod can now be removed. Notice the pellet (6) (Figure 1). 4. Change the O-ring of the piston (marked with red). Figure 9: Changing the O-ring Copyright © Nira Pumps Oy, 2014 | 04/2014... -
Page 9: Technical Information
Check the information also in the type plate (Figure 9). Figure 11: Type plate and its location (NOTE! The picture is suggestive) The designing of the pump is based on the standard EN 1176-1. NIRA Playground pumps are CE-marked. Copyright © Nira Pumps Oy, 2014 | 04/2014... -
Page 10: Warranty
HOUSE HOLD WASTE: plastic, and other materials which cannot be separated further. Contact your local disposal authority for more details of how to recycle. Follow the instructions given in local collection points Copyright © Nira Pumps Oy, 2014 | 04/2014... -
Page 11: Contact Information
P.O. Box 54, Putajantie 42 Email: service@lojer.com FI-38201 Sastamala Tel.. +35810 830 6700 Fax. +35810 830 6702 Email: firstname.lastname@lojer.com nira.info@nira.fi www.lojer.com Model: ________________________________________________________ Serial number: __________________________________________________ Date of purchase: ________________________________________________ Your local dealer:____________________________________________ Copyright © Nira Pumps Oy, 2014 | 04/2014...