Klarstein ALINA 60 SMART Manual page 27

Light on/off
Briefly press the LIGHT key to switch the light on. Press the key again to switch the light
off.
Setting the light color
Press and hold the light key to set the light color. The display shows [0]. Now briefly
press the speed key several times to adjust the light color from [L1] to [L9]:
L1 = white
L4 = blue
L7 = orange
After setting the desired color, long press the LIGHT button again to complete the setting.
Enable WIFI
In standby mode, long press the WIFI button to activate the WIFI function. The WIFI
icon will start flashing. Set up the connection as described in the chapter „Device
Control by Smartphone". As soon as the connection is successful, the WIFI symbol lights
up continuously. If no connection is established within 3 minutes, the WIFI icon stops
flashing and the device automatically switches to standby mode.
L2 = red
L5 = yellow
L8 = cyan
L3 = green
L6 = purple
L9 = green-yellow
EN
27