Specifications; Intended Use; Power Supply - Makita LC1230 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Blade diameter
Hole (arbor) diameter
Max. kerf thickness of the saw blade
No load speed
Dimensions (L x W x H)
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Cutting capacity
Workpiece shape
Cutting angle
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
DOUBLE INSULATION
Wear safety glasses.
Do not place hand or fingers close to the
blade.
To avoid injury from flying debris, keep
holding the saw head down, after making
cuts, until the blade has come to a com-
plete stop.
For your safety, remove the chips, small
pieces, etc. from the table top before
operation.
Model
Net weight
Safety class
90°
45°
516 mm x 306 mm x 603 mm
115mm
90mm
Only for EU countries
Due to the presence of hazardous compo-
nents in the equipment, used electrical and
electronic equipment may have a negative
impact on the environment and human
health.
Do not dispose of electrical and electronic
appliances with household waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and its adaptation to national law,
used electrical and electronic equipment
should be collected separately and
delivered to a separate collection point
for municipal waste, operating in accor-
dance with the environmental protection
regulations.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.

Intended use

The tool is intended for cutting in mild steel and stain-
less steel with appropriate saw blades.

Power supply

The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
5 ENGLISH
LC1230
305 mm
25.4 mm
2.5 mm
-1
1,700 min
19.2 kg
/II
A X B B
A
A
75 mm x 150 mm
100 mm x 100 mm
85 mm x 85mm