Advertisement

Quick Links

NT-1400

Advertisement

Table of Contents
loading

Summary of Contents for Naxa NT-1400

  • Page 1 NT-1400...
  • Page 2: Table Of Contents

    Table of Contents Cautions........... Warnings and TV Menu Operation ........... 16~20 ..............Channel ..................... In the Box Picture ....................Sound ....................Time ....................Option ....................Lock ...................... At a Glance ..............5~13 Main Unit ....................FM Radio Receiving ............20,21 TV stand assemble instruction ............
  • Page 3: Warnings And Cautions

    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. This product should not be exposed to dripping or splashing. No objects filled with liquids (vases, cups, etc.) should be placed on or near this product.
  • Page 4: In The Box

    If anything is missing, check back with your local retailer to get immediate assistance. If they can not help you, please contact our Support team. NT-1400 Portable TV •...
  • Page 5: At A Glance

    At a Glance Remote Detects IR signals from the included remot e sensor control. Main Unit Power indicator; Lights green when the TV is connected to the power and stand by; Lights red when TV is charging; The indicator will darken the TV is fully charged. Power/Standby.
  • Page 6 Antenna 75 ohm coaxial connector for TV antennas. input jack HD-IN jack VGA input jack Watch video files from an external media player AV-IN jack through the AV IN jack with the supplied A/V cable and setting source mode to AV. 3.5 mm ster eo audio output.
  • Page 7: Tv Stand Assemble Instruction

    How to Connect Swivel Knob Brace holder to TV stand Step 1. Step 2. Take out the Swivel Knob holder and put it in straight forward Remove and place it close to you. position. Unlock the Swive. l Knob Brace holder unlock Remove Screw...
  • Page 8 Step 4. Step 5. Position TV Stand straight forward position to align the Brace holders. Place the (L)Brace holder on left side and slide it in forward till it lick in. HOLD together Slide in >>> Step 6. Step 7. HOLD down (L)Brace holder till it stays fit.
  • Page 9 Step 8. Mount the Screw wing knob and Screw in till tight. TV STAND Lock IS READY Screw Swivel up or down (R)Brace (L)Brace NOTE: Loose the Wingnut brace holder to swivel TV up or down. Then lock till desire position. Step 9.
  • Page 10 Final Step. Step 10. TV stand is ready and set to watch TV. Congratulations! Base stand is now set. Page...
  • Page 11: Remote Control

    Remote Control Power Power Switching Key. Turn the TV on or off. MUTE Enable/disable the sound output. change the picture preset mode. P.MODE Temporarily pause the video. FREEZE change the sound preset mode. AUDIO Voice prompt function On/Off Return Go to the last viewed channel. Channel Use the number keypad to change the Keys...
  • Page 12 Change the default audio language. Change the closed-caption display modes. If available, view program guide information from over-the-air ATSC TV broadcasts. ZOOM Picture modes Set a sleep timer (max 240 minutes). SLEEP The following keys only work when playing music/videos in MEDIA mode.
  • Page 13 Notes: The remote control operates with 2 pcs “AAA” batteries (included. To turn on the remote control, place the “AAA” 1 . Keep within 6 feet distance when using the remote batteries inside the battery compartment on the back. control to work TV. 2 .
  • Page 14: Basic Operation

    Basic Operation Connect the Antenna Use the supplied external antenna for improved TV Connect the Power Supply External Magnetic reception. Connect one end of the Use the supplied power adapter to connect the DC Sucker Antenna to the Antenna Input jack [12] of the TV. Input jack [1 9] on the TV to a power supply.
  • Page 15: Using The Built-In Battery

    To tune to channel 15-1, for instance: Warnings: 1. Press the “1” key, then press the “5” key. To charge the battery, just connect the AC adapter. 2. Press the “--/-” key. Recharge the built-in battery when you are ready to use it again.
  • Page 16: Tv Menu Operation

    TV Menu Operation Press the MENU key on remote to access the menu list and then press the OK key to enter the list. Press the Press key to move within the Menu, and then press the OK key to cofirm the change. To exit the menu, press the MENU key to back out of all menu options.
  • Page 17 Troubleshooting Tip 1. Missing Channels or Channels not: Found Channel selection is based on signal strength at the time of an auto-scan. If you are missing a channel you expect to find, first research the location of broadcast towers in your area. Aiming the antenna in the direction of the broadcast towers will significantly increase its signal strength.
  • Page 18: Picture

    Sound Picture 1. Sound mode: Set a preset equalizer to match the 1. Picture mode: Select a picture preset that looks type of program you are watching from; standard, best (Standard, Soft, user, and Vivid). music, movie, sports, and user setting. 2.
  • Page 19: Time

    Option Time 1. OSD Language: Set the display language of the 1. Clock: Press the “ ” key to enter the menu, onscreen menus. then the / to select; then press the / 2. Closed Caption: When closed caption is available keys to adjust the current date and time.
  • Page 20: Lock

    Lock FM Radio Receiving: Use the remote control to enter the default password (0000) to access the Lock options. Press "MODE" to select " FM Radio" mode, and then 1. Lock System: Enter the default password of (0000) press the RED key on remote to scan and save the to access the Lock Options to enable or disable.
  • Page 21 How to work the FM radio: FM Radio lnfo 87.00 CH01 Channel Number:1 FM CH number 87.00 CH02 Frequency: 87.00 Frequency/Station 87.00 CH03 Name: CH01 You can change the FM Channel Frequency by pressing Name/Number 87.00 CH04 the (OK) button on remote. press the(R)arrow key to 87.00 CH05...
  • Page 22: Multimedia Interface

    Multimedia Interface Support format as follow: Make sure your USB drive is in the USB Slot on the TV. From the input Menu, select MEDIA. Press OK to Multimedia Support file access either Photo/Music/Movie/ or Text icon. Photo Photo Playback Music Insert your USB drive in the USB Slot on the TV.
  • Page 23 Screen type TFT LCD 14.1" Screen resolution 1280x 800 Removable Memory Support Playable Media MP3, JPEG, MPEG, XVID, AVC, MP4, Formats H.264, HEVC(H.265), FLV, MKV, TXT HDTV signal support ATSC ATSC: 57MHz-861MHz Receving requency Range NTSC: 55.25MHz-801.25MHz Modulation Mode 8VSB 64QAM 256QAM Speaker Output Power 1 W x 2 (2 W total) Rechargeable lithium polymer bat-...
  • Page 24: Limited Warranty

    Limited Warranty provides a Limited Warranty of ONE YEAR for all of its products. NAXA NAXA warrants this product to the original purchaser ONLY, to be free from defects in materials and workmanship originating from the manufacturer. agrees, at its discretion during...

Table of Contents