Naxa NTL-4300N User Manual

Portable Utility Lantern and TV
NTL-4300N
User's manual
4. Description of Buttons on Remote Control
● Power: Press to turn the TV on or off. (The main power switch
on the main unit must to set to the ON position.)
● ZOOM: Change the magnification level of the TV.
● FREEZE: Freeze ON/OFF
● (Mute Key): Press to temporaritly disable sound output from the
speakers. Press it again to restore the sound.
● Channel Key (Number key (0-9) and --/- ):
Enter a channel number to tune to a station directly.
● : Return Key. Press this key to return to the last channel you
were watching.
● SOURCE: Press this button to switch between TV/CARD/
USB mode.
● INFO: When you press this key, the system will display messages
/information about the current program.
● : up and down direction key
● : left and right direction key
● CH+/CH- (Channel keys):
Press CH+ key to tune to a higher channel.
Press CH- key to tune to a lower channel.
● VOL+/VOL- (Volume control keys):
Press VOL+ to increase the volume.
Press VOL- to decrease the volume.
● ENTER: confirm button
● MENU: Menu key. Press to enter the system menu.
● EXIT: Exit Key. Press to exit a menu. .
● AUDIO: Press to change the audio track (if an alternate track is
available).
● CC: Press to show/hide closed captioning (if CC is available).
● EPG: Press to display the Electronic Program Guide that is
included with ATSC TV broadcasts.
4
1. Precautions
1. Storage
※ Do not store this device in the environment with extreme temperature; the
appropriate storage temperature is -20~60℃, and the operating temperature
is -5~40℃;
※ Do not use this device in the bathtub, washbasin, kitchen, washtub and other
place with water or moist basements, swimming pools or similar places;
※ Keep the device away from humid, dusty and smoky environments.
※ Do not drop the device or subject it to strong shocks or impacts.
※ Do not leave the device in a car. Avoid using the device in an environment
subject to strong vibrations.
※ Do not poke or scrape the device with sharp objects.
2. Maintenance
Please disconnect all cables before cleaning the device;
※
※ Please wipe the dirt on the shell, display and keys with soft a cloth lightly
moistened with water.
※ Do not wipe the device with polishing cloth, scouring powder, alcohol, benzene
and other volatile agents or chemical cleaning agents.
Warning:
※ To ensure the safety of you and others, do not watch the TV or turn on
the TV when you are driving;
※ It is very dangerous to watch TV programs or operate the TV when you are
driving.
Special Note:
LCD screen may have a few bright spots or dark spots, which is a very common
phenomenon of active-matrix display technology and does not mean that there are
defects or failure. Do not attempt to repair. If a failure occurs, immediately turn off
the TV, and notify the company or the dealer. The TV is composed of many
precision electronic components; disassembly or modification may damage
or destroy the TV.
3. Battery charging mode
※ The battery can be charged when the TV is in standby state or power on state;
※ If the built-in battery is used, the device will turn off automatically when the
battery voltage drops to certain level; please connect to charge with the AC or
DC power supply.
1
● P.MODE: Picture Mode. Press to change the picture mode preset:
Standard, Dynamic, Soft, Personal.
● S.MODE: Press to change the sound mode presets:
Personal, Standard, Music, Movie, Sports.
● CH.LIST: View the channel list to see the entire program list.
● FAV.LIST: Favorite list
● SLEEP: Set a Sleep timer (up to 240 minutes)
● REP: Repeat (CARD/USB mode only)
● :Play/Pause (CARD/USB mode only)
● :Stop (CARD/USB mode only)
● :Previous track (CARD/USB mode only)
● :Next track (CARD/USB mode only)
● :Fast backward (CARD/USB mode only)
● :Fast forward (CARD/USB mode only)
5
4. Notice for battery charging/discharging
※ It is normal that the battery become hot during charging; if, however, the battery
temperature exceeds 60 , immediately disconnect it from the power supply
℃
and contact qualified personnel;
※ If the ambient temperature is too high during charging, the battery may not
charge fully;
※ Charging the battery is most efficient when the ambient temperature is
15℃ - 25℃.
※ To ensure the reliability of the battery, please charge and discharge the battery
every three to six months if the device isn't used for long time.
2. Packing list
Check whether all parts are included after opening the package.
1. AC power cable 3. Remote control
2. Manual 4. Antenna
5. Antenna connector 6. DC power cable
3. Appearance
09
10
08
07
11
06
12
05
13
04
MODE
14 03
15
16
02
17
01
2
5. Interface connection diagram
1. Power connection:
Connect the AC power cable to the
"figure 8" AC Power In socket [18].
Use the DC power cable to connect to the DC
Power In socket [17].
MODE
** Choose only one power source at a time. Never
use the AC Power In and DC Power In sockets
at the same time. **
Charging a mobile phone: You can charge your mobile phone or other small
electronic device from the USB port [16]. Use the original USB cable
provided by your device manufacturer to charge it.
Note: To ensure sufficient current to charge your device,
do not operate the TV or the light
while charging.
6
1. TFT-LCD screen
2. Remote-control sensor
3. OK: Confirm button
4. MENU: MENU button
5. CH+/ : Press to tune to the next channel, or press to browse up through
on-screen menus.
CH-/ : Press to tune to the next channel, or press to browse up through
on-screen menus.
6. MODE: Press to change the active mode (TV, Card/USB)
7. Light switch: The switch main light and brightness adjustment.
8. LED main light
9. LED night light
10. Handle
11. Night light switch
12. EXIT: EXIT button
13. VOL+/ : Volume up/Right button
VOL-/ : Volume down/Left button
14. Antenna input port
15. SD memory card slot
16. USB port
17. DC Power In +9V
18. AC Power In (AC100-240V~50/60Hz)
19. Headphone jack
20. Power switch: CARD/USB/TV mode of power switch
21. Charging indicator: Lights red when the unit is charging.
Off when the unit is fully charged.
22. Speaker
21
20
19
18
3
TV Menu Operation
To access the TV menu, press the MENU key. On the menu screen,
press CH+/▲ or CH-/▼ to browse the settings. Press OK to select an
item; press VOL+/► or VOL-/◄ to adjust an item; press EXIT to
return to the previous screen.
1. Picture: adjust image options.
1. There are four options of picture mode, which are Personal,
Standard, Dynamic and Soft.
2. Contrast adjust the black and white contrast of the image
3. Brightness adjust the brightness of the image
4. Color adjust the color of the image
5. Sharpness adjust the sharpness of the image
6. Tint adjust the red and green balance of the image
2. Audio: adjust the sound options.
1. There are four options of sound mode, which are Personal,
Standard, Movie and Music.
3. Time: Adjust the clock and time options
1. Sleep Timer: Set the TV to turn off at the end of the timer.
2. Time Zone: Set your area.
3. DST:Enable/disable Daylight Savings Time.
4. Time Format: Set the clock to display 12 hours or 24 hours.
5. Auto Sync: Set the system time automatically from the ATSC
broadcast.
6. Clock: Adjust the system.
7
.
22