Toyota COROLLA CROSS Manual page 65

fications can be used.
This vehicle is designed to conform
to SAE J1819.
WARNING
■
When installing a child
restraint system
Observe the following precau-
tions.
Failure to do so may result in
death or serious injury.
●
Firmly attach the top tether
strap and make sure that the
belt is not twisted.
●
Do not attach the top tether
strap to anything other than the
anchor bracket.
●
After securing a child restraint
system, never adjust the seat.
●
Follow all installation instruc-
tions provided by the child
restraint system manufacturer.
www.carobook.com
●
Outboard rear seats: When
installing the child restraint sys-
tem with the head restraint
being raised, after the head
restraint has been raised and
then the anchor bracket has
been fixed, do not lower the
head restraint.
Using a top tether anchor-
age (for Puerto Rico)
■
Top tether anchorages
Top tether anchorages are pro-
vided for each rear seat.
Use top tether anchorages
when fixing the top strap.
1-2. Child safety
Top tether anchorages
Top strap
■
Fixing the top strap to the
top tether anchorages
Install the child restraint system
in accordance to the operation
manual enclosed with the child
restraint system.
Rear outboard seats

1
Adjust the head restraint to
the upmost position.
If the head restraint interferes with
your child restraint system, and the
head restraint can be removed,
remove the head restraint.
(P.127)
2
Latch the hook onto the top
tether anchorage and tighten
the top strap.
Make sure the top strap is securely
latched. (P.58)
When installing the child restraint
system with the head restraint
being raised, be sure to have the
top strap pass underneath the head
65
1