Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SSP Super BEE BSW
Summary of Contents for SSP Super BEE BSW
- Page 1 Asdasd SSP Professional Lighting ~ 1 ~ www.sspworld.com...
-
Page 2: Table Of Contents
Super BEE BSW Table of contents 1. Safety instructions ..................2. Operating determination ................3. Fixture exterior view ................. 4. Installation ....................Connection to the mains .............. Replacing gobos ................Rigging the fixture ................ DMX-512 connection …..............5. Control menu map .................. -
Page 3: Safety Instructions
Warning! Risk Group 2 LED product according to EN 62471. LED light emission. Risk of eye injury! Do not look straight at the fixture´s LED source during operation. The intense light beam may damage your eyes. SSP Professional Lighting ~ 3 ~ www.sspworld.com... -
Page 4: Operating Determination
CAUTION! To avoid damage of the internal parts of the fixture head never let the sunlight or other fixture lights directly to the front lens even when the fixture is not working! SSP Professional Lighting ~ 4 ~ www.sspworld.com... -
Page 5: Fixture Exterior View
The head has to be locked for transportation- the tilt lock latch (3) and the pan lock latch (4) have to be in the locked positions. To unlock the head, move these latches to unlock positions before operating the fixture. SSP Professional Lighting ~ 5 ~... -
Page 6: Installation
For protection from electric shock, the fixture must be earthed! The Super BEE BSW is equipped with auto-switching power supply that automatically adjusts to any 50- 60Hz AC power source from 100-240 Volts. Power cord is enclosed to the fixture. Install a suitable plug on the power cord if needed, note that the cores in the power cord are colored according to the following table. -
Page 7: Replacing Gobos
6. Use the menu Service to fine adjust replaced gobo (Service -> Calibration -> Calibrate effects -> R. Gobo Index 1 ...R. Gobo Index (6). Note. The magnet (9) of the gobo holder has the same function as the position point (4) on the rest of gobo holders. SSP Professional Lighting ~ 7 ~ www.sspworld.com... -
Page 8: Rigging The Fixture
Use 2 appropriate clamps to rig the fixture on the truss. Follow the instructions mentioned at the bottom of the base. Make sure that the device is fixed properly! Ensure that the structure (truss) to which you are attaching the fixtures is secure. SSP Professional Lighting ~ 8 ~ www.sspworld.com... - Page 9 2.Fasten the omega holders on the bottom of the base by inserting both quick-lock fasteners (4) into the holes of the base and tighten fully clockwise. 3.Pull the safety wire (2) through the attachment point and around the truss (6). SSP Professional Lighting ~ 9 ~ www.sspworld.com...
- Page 10 Alternatively, fixtures handles can be used for safety attachment When installing fixtures side-by-side, avoid illuminating one fixture with another! DANGER TO LIFE! Before taking into operation for the first time the installation has to be approved by an expert! SSP Professional Lighting ~ 10 ~ www.sspworld.com...
-
Page 11: Dmx-512 Connection
Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a 120 Ω resistor between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the last fixture. SSP Professional Lighting ~ 11 ~... -
Page 12: Control Menu Map
Press S3 enter to option selection Page; Pan/Tilt Reset b) Press S2 or S4 to select Reset options; Reset c) Press S3 to save and exit at selection Page; All reset d) Press S1 to exit. SSP Professional Lighting ~ 12 ~ www.sspworld.com... -
Page 13: Technical Specifications
Input voltage range:....100-240V, 50/60Hz Max. power consumption:..500W@230V Fuse:........8A, 250V Light source: 200W white engine Colour temperature: 6500K CRI=80 Colour wheel 9 dichroic filters + open CMY colour mixing Smooth CMY color mixing system SSP Professional Lighting ~ 13 ~ www.sspworld.com... - Page 14 High temperature borofloat or better glass "Slot&lock" system for easy replacement of gobos. Warning! All glass Gobos which needed change, must be supply from the original factory. These glass gobos are professional heat-resistant glass Gobos. Or we would not be providing any warranty for them! SSP Professional Lighting ~ 14 ~ www.sspworld.com...
- Page 15 Mounting horizontally or vertically via 2 Omega brackets Temperatures Maximum ambient temperature: 45° C Maximum housing temperature: 80° C Minimum distances Min. distance from flammable surfaces: 0.5 m Min. distance to lighted object: 2 m Weight 22Kg (Net) SSP Professional Lighting ~ 15 ~ www.sspworld.com...
-
Page 16: Maintenance And Cleaning
4) Replace the fuse holder in the housing and fix it. 12.1 Disposing of the product To preserve the environment please dispose or recycle this product at the end of its life according to the local regulations and codes. SSP Professional Lighting ~ 16 ~ www.sspworld.com... -
Page 17: Photometric Diagram
8. Photometric diagram SSP Professional Lighting ~ 17 ~ www.sspworld.com... -
Page 18: Dmx Protocol
9. DMX Protocol Super BEE BSW DMX Channel Mode/Channel Value Function 0-255 0-100% Pan fine 0-255 0-100% Tilt 0-255 0-100% Tilt fine 0-255 0-100% Pan/Tilt Speed 0-255 Fast -> Slow Dimmer 0-255 0-100% Dimmer fine 0-255 0-100% Strobe/Shutter Close 4-103 Strobe，Slow ->... - Page 19 0-100% Prism1 0-127 Prism 1 out 128-255 Prism 1 in to the light beam Prism1 Rotate 0-127 0-100% 128-191 Rotation(CW): Fast -> Slow 192-255 Rotation(CCW): Slow -> Fast Prism2 0-127 Prism 2 out SSP Professional Lighting ~ 19 ~ www.sspworld.com...
- Page 20 Reset 0-31 Unused 32-63 Pan/Tilt Reset 64-95 Head Reset 96-127 Complete Reset 128-159 Reserved 160-191 Reserved 192-223 Reserved 224-255 Reserved Note: There may be difference on the User Manual according to product version. SSP Professional Lighting ~ 20 ~ www.sspworld.com...
Need help?
Do you have a question about the Super BEE BSW and is the answer not in the manual?
Questions and answers