Contents Introduction............3 Dimensions............4 Safety Information..........5 Using for the first time........7 AC power............8 Data link..............8 Setup..............9 Menu chart............10 DMX Protocol&Channel Function....14 Service and maintenance........19 Cleaning..............20...
Introduction 380W Beam Spot Wash 3 in 1 Moving head light Model:SMART380W Voltage:AC100V-240V 50/60Hz Power Consumption:500W Light source:YODN R20 380W Color Temperature:8000K Beam Angle:1.5°- 35° linear fast zooming. Focus:High precision optical lens,electronic linear control Linear Dimmer:Mechanical dimmer 0-100% Color Wheel:14 fixed color+open,half-tone effect, linear color conversion, bi-directionally rotatable at variable speeds and rainbow effect Rotating Gobo:12 rotating gobos+White,bi-directional rotatable and gobo shaking at variable speeds...
Safety Information WARNING! Read the safety precautions in this section before ! installing, powering, operating or servicing this product. This product is for professional use only. It is not for household use. The following symbols are used to identify important safety information on the product and in this manual: Protection DANGER! DANGER!
Page 6
PROTECTION FROM ELECTRIC SHOCK • Disconnect the fixture from AC power before removing or installing any cover or part and when not in use. • Always ground (earth) the fixture electrically. • Use only a source of AC power that complies with local building and electrical codes and has both overload and ground-fault (earth-fault) protection.
PROTECTION FROM INJURY •When light up the fixture,please don’t look at the optical lens with eyes directly.Besides, don’t use the camera light to point at the optical lens. • Fasten the fixture securely to a fixed surface or structure when in use. The fixture is not portable when installed.
AC power Warning! Read “Safety Information” starting on page 5 before connecting the SMART350W to AC mains power. Warning! For protection from electric shock, the SMART350W must be grounded (earthed). The power distribution circuit must be equipped with a fuse or circuit breaker and ground-fault (earth-fault) protection.
Connecting the data link Connecting the data link To connect the to data: SMART350W 1. Connect the DMX data output from the controller to the closest SMART350W male 5/3-pin XLR DMX input connector. 2. Connect the DMX output of the fixture closest to the controller to the DMX input of the next fixture and continue connecting fixtures output to input.
Menu chart: Sub Menu Main Menu Setting Address 000-512 Velocity 000-255 Quality 000% - 100% Signal Start up 000-255 Static ID 0000-9999 Return ► 16CH 18CH Chun Mode 24CH Defe Run Mode Musc Auto Dmx Lamp Open Lamp Default Open Lamp Control Open Sig Clear...
Page 11
Return ► Work Hour 0000-9999 Curr Hour 0000-9999 Lamp Hour 0000-9999 Limit Hour 0000-9999 Work Times 0000-9999 TFT Verion V0.XX Motr Verion V0.XX Fan Rev V0.XX Natu Pan Back InfoSee Natu Tilt Back Natu Color Hell Natu Gobo Hell Natu Focus Hell ►...
Page 12
Focus Fine 000-255 Auto Focus 000-255 Shutter 000-255 Dimmer 000-255 Dimm Fine 000-255 Return ► Pan rotating 000-255 Pan Fine 000-255 Tilt rotating 000-255 Tilt Fine 000-255 XY Speed 000-255 Reset Lamp 000-255 Color wheel rotating 000-255 Color wheel Fine 000-255 Effect SP 000-255...
DMX Protocol 16Channel 18 Channel 24Channel DMX Value Function Channel 1 Channel 1 Channel 1 0 - 255 Pan fine Channel 2 Channel 2 0 - 255 Pan fine Tilt Channel 2 Channel 3 Channel 3 0 - 255 Tilt Tilt fine Channel 4 Channel 4...
Page 15
56 - 60 Color 12 61 - 65 Color 13 66 - 70 Color 14 71 - 75 Color 15 76 - 80 Color 16 81 - 85 Color 17 86 - 90 Color 18 91 - 95 Color 19 96 - 100 Color 20 101 - 105...
Page 16
55 - 59 GOBO11 60 - 64 GOBO12 65 - 69 GOBO13 70 - 74 GOBO14 75 - 79 GOBO15 80 - 84 GOBO16 85 - 89 GOBO17 90 - 129 Forwards gobo wheel rotation from fast to slow 130 - 134 No rotation (Stop) 135 - 170 Backwards gobo wheel rotation from slow to fast...
Page 17
45 – 49 GOBO 9 50 – 54 GOBO 10 55 – 59 GOBO 11 60 – 64 GOBO 12 Index - set indexing on channel 9/11/12 Shaking gobos from slow to fast 65 – 74 GOBO 1 Shake,Slow → Fast 75 –...
Page 18
Prism rotation and indexing Prism indexing - set position on channel 10/12/14 0 - 255 Prism indexing Prism rotation - set position on channel Channel 11 Channel 13 Channel 15 10/12/14 No rotation 1- 127 Forwards prism rotation from fast to slow 128 - 129 No rotation (Stop) 130 - 255...
Gobo replacement Identification of gobo wheel To replace a gobo: • Disconnect the fixture from power and allow to cool. • Position the head and apply the tilt lock. • Remove the rear head cover located on the same side as the pan lock (A).
Cleaning Cleaning schedules for lighting fixtures vary greatly depending on the operating environment. Environmental factors that may result in a need for frequent cleaning include: • Use of smoke or fog machines. • High airflow rates (near air conditioning vents, for example). •...
Need help?
Do you have a question about the SMART 380W and is the answer not in the manual?
Questions and answers