Motorola PIP1500 User Manual page 13

Registering the baby (camera) unit to the parent unit
(Pairing)
We have paired the baby unit to the parent unit in the pack. In case you want to
pair an extra camera, press and hold
until the voice prompt 'Ready for pairing' is heard.
Wall mount the baby (camera) unit
1
4
1. Mark the positions of 2 screw holes on the wall. Drill a screw hole at each
marking.
2. Install the supplied wall anchors into 2 screw holes on the wall.
3. Insert the supplied wall mounting screws into the wall anchors.
4. Fix and fasten the underside of the baby (camera) unit and the wall
mount bracket with the supplied separate screw.
5. Hang the wall mount bracket on the wall mounting screws on the wall.
6. Adjust the camera manually if necessary.
Note
The pack includes a power adapter with a longer cord which is beneficial for
wall mount application, where your wall socket is far from the camera.
Getting to know your baby monitor
Press and hold
on the rear of the baby (camera) unit
2
5
3
13