Table of Contents
Advertisement
Contents
Connections
Power management
Power modes
o Quick start mode
This unit automatically enters quick start mode to save power in the
following cases. During quick start mode, this unit operations cause the
power to turn on.
For more information about the status LED during quick start mode,
refer to "Status LED table". (v p. 22)
Ethernet
n
After around 20 minutes of no operation and no network access after
playing music via Ethernet.
Wi-Fi
n
After around 20 minutes of no operation and no network access after
playing music via Wi-Fi.
USB
n
After around 20 minutes of no operation and no network access after
playing music from a USB flash drive.
AUX input
n
After around 20 minutes of no audio.
Settings
Tips
o Deep Standby
The device also has the ability to automatically enter "Deep Standby"
whenever the wired or wireless network connection is removed for
more than 60 minutes in quick start mode.
Status LED will turn off during Deep Standby.
To wake this unit from Deep Standby, you must press the volume or
mute buttons which will immediately turn on the front panel LED.
0 You also press the h button for 5 seconds, this unit enters the deep standby.
o Off
To completely turn off the power to the device you must remove the
mains plug from the power outlet.
27
Status LED
Appendix
Advertisement
Table of Contents
