Related Manuals for Silver King SKR27A-ES
Summary of Contents for Silver King SKR27A-ES
- Page 1 Technical Manual & Replacement Parts List Refrigerator MODEL: SKR27A-ES 115V 1600 Xenium Lane North, Minneapolis, MN 55441-3787 Phone (763) 923-2441 FORM NO. 45281-SK REV F 08/2021 Specifications Subject to Change without Notice.
- Page 2 INSPECT FOR DAMAGE AND UNCRATE Upon delivery of your new Silver King unit, uncrate at once to inspect for possible freight damage following the instructions printed on the exterior of the container. Report any damages to the carrier responsible for transportation and promptly present a claim for any evidence of mishandling.
-
Page 3: Installation
INSTALLATION The stainless steel exterior of the cabinet has been protected by a plastic covering during manufacturing and shipping. This covering can be readily stripped before installation. After removing this covering, wash the interior and exterior surfaces using a warm, mild soapy water solution and a sponge or cloth, rinse with clean water and dry. - Page 4 Your Silver King refrigerator is equipped with an eight (8) foot power cord. Any attempt to modify the plug will void the warranty, terminate the manufacturers responsibility, and could result in serious injury.
- Page 7 REPLACEMENT PARTS LIST – SKR27A-ES 115V ITEM PART DESCRIPTION PART NO. DOOR ASSEMBLY (STANDARD) 38361 DOOR GASKET 10310-75 TEMPERATURE INDICATOR 22409 PILASTER 20" 24600 SHELF 35835 SHELF SUPPORT 99530 POWER CORD 115V 32199 TEMPERATURE PROBE 38822 CAPILLARY TUBE EVAPORATOR 44789...
- Page 9 Thermistor Field Testing Use the guide below to test if a thermistor (temperature probe) is functioning properly. See the replacement parts list for part number information. Table 2 is valid for all thermistors listed on table 1. • Establish Thermistor Temperature Table 2 ▪...
- Page 10 Silver King’s review to be inefficient or inoperative due to defects in material or factory workmanship.
- Page 11 Equipment, that it will replace the compressor with one of similar design and capacity, exclusive of delivery and installation charges, if it is found subject to Silver King’s review to be inefficient or inoperative due to defects in material or factory workmanship. It is the original purchaser’s responsibility to return the serial plate of the defective compressor, or at Silver King’s option the complete compressor, to the factory.
- Page 12 (Returned Merchandise Authorization) form must be completed and then approved by Silver King. Please contact Silver King for details. Restocking fee will apply. • All electrical equipment is single phase. • Prices, designs, and specifications are subject to change without notice. • Payments via credit card are subject to a 3.5% surcharge.