LeapFrog Interactive Learning Easel Instruction Manual page 10

7. Slide the four knobs on the back of
the Learning Panel 3 into the slots on
the A-Frame 1/2. The Learning Panel 3
will rest in the slots until it is secured.
8. Secure Learning Panel 3 to A-Frame
1/2 with two Screws on each side as
shown.
9. Snap Upper Rear Leg 4 into the top
of A-Frame 1/2 as shown with the
number 4 facing out.
10. Snap Brace 5 into the back of Learning
Panel 3 as shown with the number 5
facing up.
10