Philips Senseo HD7806/50 Service Manual page 8

Disassembly- and Reassembly advice
Removing Brew chamber head handle as follows:
• Disassemble back cover!
• Place the appliance such a way that you are
looking at the boiler.
• First remove the boiler from the snap lock
position of the brew chamber.
• To remove the brew
chamber, use your both
thumbs (see picture 3)
and push strongly with a
little distortion (rotation)
until the brew chamber
comes loose.
• Reassemble follow above steps backwards.
To reach the components placed on the base
handle as follows:
• First remove back cover, brew chamber and
3-way valve.
• Remove both Torx T15 screws see exploded
view in the near of position A.
• Bend the 2 click snap locks with a screwdriver
(see base), and the housing can now be
removed.
• To remove the rest of the housing unlock the last
4 snap locks at the base and gently pull of the
front cover.
• To reassemble follow above steps backwards.
picture 3
7