Air Conditioner Edition:2006/01/19 Parts Name Machine body MODEL: HW-18L03(T3) Front Air outlet (indoor) Operation Air inlet (indoor) Operation panel Ventilation Auto swing VENTILATOR Temp. setting Mode selection Auto swing WAIT 3 MINUTES BEFORE RESTARTING Thermostat Mode selection...
Hint When the mode selection switch is turned to " the air conditioner will only blow out air without cooling. If the mode selection switch is turned from cooling mode to fan mode, do not turn it back until at least 3 minutes have elapsed.
Page 4
Otherwise, the fuse may blow due to overload. Do not exceed the selection range. Air Conditioner This switch controls the preset indoor temperature to make the air conditioner start or stop automatically, so as to reduce power consumption and operate the system both comfortably and economically. Remarks...
When dirt accumulates in the air filter, air circulation will be blocked, and causes poor Removal of air filter For HW-18L03(T3): (1) Loosen the air inlet by pushing " PUSH " at both edges as shown. (2) Open the air inlet.
For longer and trouble-free operation of the unit, pay special attention to the following: Install the air conditioner at a location strong enough to support the unit. Leave enough space around the air inlet and outlet for better circulation. Avoid sites where flammable gas leaks.
Need help?
Do you have a question about the HW-18L03 and is the answer not in the manual?
Questions and answers