Using The Chopper - Emeril Lagasse Blender & Beyond Plus HB2248 Owner's Manual

Using the Accessories

Using the Chopper

Do not use to chop ice cubes or extremely
hard food, such as nutmeg, coffee beans,
and grains.
1. Before chopping, carefully remove the
plastic cover from the blade. The blade
is very sharp, so always hold the blade
by the upper plastic part.
2. Place the Chopper Blade on the center
pin of the Chopper Bowl. Press down
on the blade and lock the blade in
place. Always place the Chopper Bowl
on the anti-slip base.
3. Place your ingredients in the
Chopper Bowl.
4. Place the Chopper Bowl Lid on the
Chopper Bowl.
5. Attach the Motor Housing to the
Chopper Bowl Lid and twist until they
lock into place.
6. Use the Variable Speed Controller to
select a speed. Press the Unlock Button
and then press and hold the Power
Button to turn on the appliance. While
the appliance is running, hold the Motor
Housing with one hand and hold the
Chopper Bowl with the other.
7. When you are done, release the Power
Button to stop. After 10 seconds, the
Indicator Lights will turn off.
Emeril Lagasse Blender & Beyond Plus
™ 13