Mac Faucets ATD-10 User Manual

Installation Instructions
9-1/16"
ATD-10
Installation Distance
from sensor to floor
(Check with your municipality
for ADA compliance)
Sensor
For accessibility purposes, Paper Towel
Dispensers MUST be accessible to people in
wheelchairs from the front and from both sides
of the dispenser.
Floor
Open the cover with
05
supplied key
36" Lowest
48" Highest
User Manual
Automatic Paper Towel
Package Includes
Automatic Paper Towel Dispenser
Stainless Steel Construction
Integral Battery Compartment
Vandal Key
Mounting Hardware
Batteries (4 D size batteries)
Fits rolls of 8" diameter x 8" long, core diameter 1-1/2" up to 2"
All hardware necessary for satisfactory installation
Tools Needed
Safety Glasses
Hammer Phillips Screw Driver
01
03
Drill Holes Ø 1/4"
Please cut for drilling holes
Once the location for the Paper Towel dispenser has been decided
proceed with the installation steps below.
1. Use the template provided inside the box.
2. Use a level to insure that the template is straight and level.
3. Use painters tape to hold the template in place.
4. Drill holes for supplied plastic anchors.
Dispenser
Model: ATD-10
Level Cordless Drill
Drill bit
Ø 1/4" Carbide
Drill for tile
Tape
02
04
PAGE | 01