Appliance Description - Beem Air Joy Hot & Cool User Manual

Fanless ventilator with heating capability
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 19
EN
NOTE
When using for the first time, it is
possible that production-related
additives such as grease could
cause slight odour or smoke. This is
completely normal. Ensure sufficient
ventilation.

Appliance description

Overview / delivery contents
(See illustration on the left fold-out page)
1
Air ring
2
Air slot
3
Maine ON/OFF switch
4
Foot with inclination adjustment
5
Control panel with blue/red indicator
light
6
Remote control (without batteries)
7
Wall mounting
8
User manual
(not illustrated)
Control panel
Symbol
Function
Switches the appliance ON/
OFF. A beep sounds each
time the button is pressed.
Sets the continuous
airflow.
Switches rotation
movement ON/OFF. A beep
sounds each time the button
is pressed.
BEEM - Elements of Lifestyle
Air Joy Hot & Cool
Indicator light
Colour
Function
The appliance is set to cold
blue
air.
The appliance is set to warm
red
air.
Safety equipment
A safety switch is located on the under-
side of the pedestal. The appliance then
switches itself off automatically if it is
tipped or falls over.
For this reason, always place the ap-
pliance on a firm and even surface so
that the safety switch is in contact with
the surface.
Switch on the device.
To check the function of the safety switch,
proceed as follows:
Lift the pedestal of the appliance
slightly so that there is no contact to
the surface. The safety equipment
switches off the appliance.
Put the appliance back onto a firm, flat
surface and switch it on manually.
NOTE
If the safety equipment switched
off the appliance, it does not NOT
switch on again automatically. It
must be switched on manually.
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

M39.003

Table of Contents