LS iS7 User Manual

220v auxiliary power option card
Hide thumbs Also See for iS7:
Table of Contents

Advertisement

Quick Links

Safety Precaution
First thank you for using our iS7 Auxiliary Power Option Board!
Please follow the following safety attentions since they are intended to
prevent any possible accident and danger so that you can use this
product safely and correctly.
Safety attentions may classify into „Warning‟ and „Caution‟ and their
meaning is as following:
Symbol
WARNING
CAUTION
The meaning of each symbol in this manual and on your equipment is
as follows.
Symbol
After reading this manual, keep it in the place that the user always can
contact. This manual should be given to the person who actually uses
the products and is responsible for their maintenance.
 Do not remove the cover while power is applied or the unit is in
operation.
Otherwise, electric shock could occur.
 Do not run the inverter with the front cover removed.
Otherwise, you may get an electric shock due to high voltage terminals or
charged capacitor exposure.
iS7
220V Auxiliary Power Option Card User Manual
Meaning
This symbol indicates the possibility of death or
serious injury.
This symbol indicates the possibility of injury or
damage to property.
Meaning
This is the safety alert symbol.
Read and follow instructions carefully to avoid
dangerous situation.
This symbol alerts the user to the presence of
"dangerous voltage" inside the product that might
cause harm or electric shock.
WARNING
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iS7 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for LS iS7

  • Page 1 220V Auxiliary Power Option Card User Manual Safety Precaution First thank you for using our iS7 Auxiliary Power Option Board! Please follow the following safety attentions since they are intended to prevent any possible accident and danger so that you can use this product safely and correctly.
  • Page 2 220V Auxiliary Power Option Card User Manual WARNING  Do not remove the cover except for periodic inspections or wiring, even if the input power is not applied. Otherwise, you may access the charged circuits and get an electric shock. ...
  • Page 3: Table Of Contents

    220V Auxiliary Power Option Card User Manual Table of Contents Table of Contents ..................3 Introduction ................... 4 Components ..................4 Installation and Wiring ................5 Option Card Standard ................10 Parameter ..................... 12 Function offer ..................12 6.1 Option Card Recognition ..............12 6.2 Option Card Power Status LED Display ..........
  • Page 4: Introduction

    1. Introduction This user manual is standard for 220V auxiliary power option card supplying power(5V) to the CPU in controller of IS7 to continue communication with PLC or host controller through communication option card even if input power of IS7 is blocked by external factors.
  • Page 5: Installation And Wiring

    220V Auxiliary Power Option Card User Manual 3. Installation and Wiring (1) Option Module ① LED display feature Item 220V AC Input power Power On Power Off Status 220V Power input to the option card LED On LED off Color Green Left LED only one used, the green LED lights up when 220V commercial power is applied through terminal of this option card.
  • Page 6 (2) Installation and Wiring - Follow the procedures below for installation and wiring ① Installation Mount a 220V auxiliary Power option card(Slot#2) dedicated to IS7. ② Wiring Wire signal from commercial power(220V) to L1/L2 terminal block of the option card.
  • Page 7 220V Auxiliary Power Option Card User Manual - For details, see cable standard below. <Cable Standard> ① Cable Standard : AWG20~12 ② Recommended Cable Standard Recommended Wire Size [mm2] (AWG) Terminal Contact Terminal Crimp Crimp Screw Type Method Terminal Terminal (Unused) (used) Elevator...
  • Page 8 ⑥ Screw back the upper cover of the SV-iS7. ⑦ Set DR30-Auxiliary Opt = ‘Yes’, using the LCD keypad. ⑧ When the main power for SV-iS7 is on, the option board does not operate. (The LED of the option board is on when the option power supply is applied) ⑨...
  • Page 9 220V Auxiliary Power Option Card User Manual Other options mixed in use with precautions 1) The same slot op the option as shown in the table below can not be used at the same time. For example, Binary option card is to be used in slot#2. PLC, EXTENSION I/O-1, EXTENSION I/O-2, Synchronization and Safety option can not be used at the same time.
  • Page 10: Option Card Standard

    4. Option Card Standard (1) Standard Item Description YA-S7M1 Name Auxiliary Power Option Drive SV-IS7 Series Type Option Rated Input Voltage : AC 200~230V± Input Voltage 10%(50/60Hz) Output to be supplied to control board of the drive(not for external terminal) Output Voltage Rated Output Voltage: DC 5V±5%...
  • Page 11 220V auxiliary power option card supplying power(5V) to the CPU in controller of IS7 to continue communication with PLC or host controller through communication option card even if input power of IS7 is blocked by external factors <Applicable Communication Option> Basic Function...
  • Page 12: Parameter

    6. Function offer Description of SV-iS7’s functionality provided by 220V Auxiliary power option. Option Card Recognition (1) Purpose Verify whether the recognition of the option mounted on the slot#2 of iS7 drive. (2) Way of offering Code Name of Functionality...
  • Page 13: Option Card Power Status Led Display

    220V Auxiliary Power Option Card User Manual Option Card Power Status LED Display (1) Purpose Check the input power of the option through LED display. (2) Way of offering The status of LED(Green) means that LED is on when (AC 200~230V) is applied to the option.
  • Page 14 220V Auxiliary Power Option Card User Manual condition is ready to supply power to the inverter. Remark When the inverter power is turned off and the option power is on, the normal inverter driving operation is not available by supplying only the option power. The option supplying power is only for communication with other communication option.
  • Page 15: Jumper Use According To Communication Option

    220V Auxiliary Power Option Card User Manual Jumper Use according to Communication Option (1) Purpose Some options must be used to set the jumper for the IS7 product more than 90kW capacity according to communication option card type. (2) Condition...
  • Page 16 <Default Value and Not used> Caution  Do not use jumper at Ethernet/CC-Link Communication Option.  Check if the capacity of IS7 is more than 90kW. If so use the jumper at Profibus/RAPIENET/PROFIBUS-DP/RNET/CANopen/DEVICENET/ Lonworks.  When using auxiliary power option, the allowable maximum input voltage of the IS7 product is 480V.(However, the capacity of inverter is...
  • Page 17: Troubleshooting

    220V Auxiliary Power Option Card User Manual 7. Troubleshooting This page is to explain faults or abnormal symptoms that may arise while using the auxiliary power option board. If the below process do not solve the issue please contact your supplier or your regional sales manager of LSIS. Type Diagnosis resolution...
  • Page 18 220V 외부전원 옵션 사용설명서 제품을 사용하기 전에 먼저 저희 IS7 220V 외부전원 옵션을 사용하여 주셔서 감사 합니다. 안전상의 주의사항  안전상의 주의사항은 사고나 위험을 사전에 예방하여 제품을 안전하고 올바르게 사용하기 위한 것이므로 반드시 지켜주십시오.  주의사항은 ‘경고’와 ‘주의’의 두 가지로 구분되어 있으며 ‘경고’와 ‘주의’의 의미...
  • Page 19 220V 외부전원 옵션 사용설명서 주 의  옵션보드의 CMOS 소자들의 취급에 주의하십시오. 정전기에 의한 고장의 원인이 됩니다.  신호선 등의 변경 접속은 인버터 전원을 내린 상태에서 하십시오. 통신불량 및 고장의 원인이 됩니다.  인버터 본체와 옵션보드 커넥터가 정확히 일치하게 접속되도록 하십시오. 통신불량...
  • Page 20: 목 차

    220V 외부전원 옵션 사용설명서 목 차 목 차 ....................3 220V 외부전원 옵션 카드 소개 ..............4 제품 구성물 ................... 4 외관 및 배선 ..................5 옵션 카드 규격 ..................10 옵션 카드 관련 파라미터 ..............12 제공 기능 .................... 12 6.1 옵션...
  • Page 21: 외부전원 옵션 카드 소개

    이 차단되어도 통신옵션을 통해 PLC나 상위 제어기와 지속적으로 통신할 수 있도 록 CPU에 전원을 공급해 주기 위한 220V 외부전원 옵션의 규격과 설치 및 설정 방법에 관한 것 입니다. SV-iS7 인버터의 220V 외부전원 옵션은 외부 220V 상용 전원을 공급 받아 IS7 인버터의 제어 Board에 5V를 공급할 수 있도록 설계되었습...
  • Page 22: 외관 및 배선

    220V 외부전원 옵션 사용설명서 3. 외관 및 배선 (1) 외관 ① 220V 외부전원 옵션 LED 명칭 220V AC 입력 전원 옵션 전원 On 옵션 전원 Off 의미 옵션카드 전원입력 상태 LED On LED off (전원 공급) (전원 미 공급) 색상 녹색...
  • Page 23 220V 외부전원 옵션 사용설명서 (2) 체결 및 배선 - IS7 인버터에 220V 외부전원 옵션을 체결 및 배선 시 아래와 같은 절차 진행하여 주십시오. ① 체결 220V 외부전원 옵션을 IS7 본체의 Slot #2에 체결합니다. ② 배선 - L1/L2 단자대에 220V 상용전원 Cable을 배선하여 주십시오.
  • Page 24 220V 외부전원 옵션 사용설명서 - 배선관련 자세한 내용은 아래 케이블 규격을 참고하세요. <케이블 규격> ① 연결 가능 케이블 규격 : AWG20~12 ② 케이블 권장 규격 권장 배선 굵기 단자 단자 체결 [mm2] (AWG) 종류 나사 방식 압착단자 압착단자 미사용 사용 Elevator L1 / L2 0.75 (18)
  • Page 25 - 인버터 정상운전이 가능한 상태가 됩니다. 알아두기 IS7 외부전원 옵션이 동작할 때 Keypad 에 Trip 이 표기되는데 인버터 용량에 관계없이 ‘AUX Power ON’ Trip 이 발생하고, 추가적으로 다른 Trip 이 발생할 수 있으며 Keypad 에 표기되는 Trip 순서는 경우에 따라 달라질 수 있습니다.
  • Page 26 220V 외부전원 옵션 사용설명서 기타 옵션과 혼용 사용 시 주의 사항 1) 아래 표와 같이 동일 옵션 Slot의 옵션카드는 동시에 장착할 수 없습니다. Binary Card 옵션은 옵션 Slot #2 에 장착되므로 PLC, EXTENSION I/O-1, EXTENSION I/O-2, Synchronization, Safety 옵션과 동시에 장착할 수 없습 니다.
  • Page 27: 옵션 카드 규격

    4. 옵션 카드 규격 (1) 기본 규격 항목 설명 YA-S7M1 형명 (영문: Auxiliary Power Option 국문: 220V 외부전원 옵션) 적용 인버터 SV-IS7 Series 형태 옵션 입력 전원 정격입력전압: AC 200~230V±10%(50/60Hz) 인버터 본체에 공급하는 출력(외부 단자로 공급되는 출력 아님) 출력 전원 정격출력전압: DC 5V±5% 정격출력...
  • Page 28 - PROFIBUS-DP - ETHERNET - CC-Link - RAPIEnet 알아두기 Ethernet Option 사용 시 인버터 전원이 차단되고 IS7 외부전원 옵션이 동작할 때 Ethernet 통신특성 상 정상통신을 위하여 반드시 상위제어기의 Reset 을 하십시오. (2) 사용 환경 주위 온도 -10℃ ~ 50℃ 보관 온도...
  • Page 29: 옵션 카드 관련 파라미터

    해당 파라미터를 설정하지 않았을 경우 외부전원 옵션을 정상적으로 사용할 수 없습니다. 6. 제공 기능 SV-iS7 220V 외부전원 옵션에서 제공하는 기능을 설명합니다. 옵션 카드 인식 (1) 목적 iS7 인버터의 옵션 슬롯 2 에 장착된 220V 외부전원 옵션의 인식여부를 확인합니다. (2) 제공 방법 코드 기능명 표시값...
  • Page 30: 옵션 카드 전원 상태 Led 표시 기능

    220V 외부전원 옵션 사용설명서 옵션 카드 전원 상태 LED 표시 기능 (1) 목적 220V 외부전원 옵션의 전원 입력 상태를 LED 표시를 통해 확인 합니다. (2) 제공 방법 LED(녹색)은 220V 외부전원 옵션에 전원(AC 200~230V)이 공급될 때 LED 가 On 되어 그 상태를 모니터링 할 수 있도록 합니다. 명...
  • Page 31 220V 외부전원 옵션 사용설명서 인버터로 전원을 공급하는 상태가 됩니다. 알아두기 인버터 주 전원이 차단된 상태에서 외부전원옵션 전원만 투입되었을 경우에는 IS7 제어보드와 통신옵션의 구동전원만 공급하는 것으로 인버터 운전 등의 정상동작은 불가능합니다.
  • Page 32 220V 외부전원 옵션 사용설명서 6.4 통신 옵션 별 Jumper 사용 (1) 사용 목적 외부전원 옵션을 IS7 90kW 이상 제품 용량에 적용하여 사용시 정상적인 동작을 위해 통신옵션 따라 일부 옵션에는 Jumper 를 설정하여 사용해야 합니다. (2) 사용 조건표 통신 옵션 및 인버터 용량에 따른 Jumper 사용 여부에 대한 내용은 아래...
  • Page 33 주 의  Ethernet/CC-Link 통신 옵션은 해당 Jumper 를 사용하지 마십시오.  Profibus/RAPIENET/PROFIBUS-DP/RNET/CANopen/DEVICENET/ Lonworks 통신 옵션은 인버터 용량을 확인 후 점퍼을 사용 하십시오.  외부전원 옵션사용 시 IS7 90kW 이상 제품 용량의 허용 인버터 최 대 입력전압은 480V 까지 입니다.
  • Page 34: 문제 해결하기

    7. 문제 해결하기 이 장은 외부전원 옵션 사용 중 고장 및 이상 현상이 발생한 경우 문제 해결 방법 을 설명하는 것입니다. 다음 조치 사항을 확인한 후에도 옵션이 정상적으로 동작하 지 않으면 구입처나 LS 산전 고객 센터에 문의하십시오. 항목 진단 조치사항...

Table of Contents