Operation And Use - Beem i-Turbo User Manual

EN

Operation and use

Using as upright vacuum cleaner
To use the appliance as an upright vacu-
um cleaner, proceed as follows:
Push the handheld vacuum cleaner
‹
(4) into the housing of the upright
vacuum cleaner (9) until it snaps in
(image D1).
Switch the appliance on or off with the
‹
ON/OFF button (1) on the handle.
Using as
handheld vacuum cleaner
To use the appliance as a handheld vacu-
um cleaner, proceed as follows:
Press both release mechanisms (10)
‹
on the sides of the handheld vacuum
cleaner at the same time.
Remove the handheld vacuum clean-
‹
er (4) from the housing of the upright
vacuum cleaner (9).
Switch the appliance on or off with the
‹
ON/OFF button (3) on the handheld
vacuum cleaner.
Using accessories
(images E1-E2)
The joint nozzle (12) and the upholstery
brush (13) are located at the back of the
charging station (14) (image E1-E2). To
use them, proceed as follows:
Take the desired attachment out of the
‹
charging station.
Remove the handheld vacuum
‹
cleaner.
Put the attachment onto the handheld
‹
vacuum cleaner.
BEEM - Elements of Lifestyle
i-Turbo Akkusauger 2 in 1
Emptying the dust container
Images (F1)
To empty the dust container, proceed as
follows:
Take the handheld vacuum cleaner
‹
out of the housing of the upright
vacuum cleaner as described in the
section Using as handheld vacuum
cleaner (page 27).
Press the release mechanism (16) of
‹
the dust container and take out the
dust container.
Pull the filter (5) out of the dust con-
‹
tainer (7).
Empty the dust container.
‹
Take out the filter (5) and remove the
‹
textile filter element (6).
Clean the filter element as described
‹
in the section Cleaning and care
(page 28).
Put the filter and filter element togeth-
‹
er again and insert the filter back into
the dust container.
Insert the dust container back into the
‹
appliance.
Charging the vacuum cleaner
(image G1)
To charge, put the upright vacuum cleaner
together with the handheld vacuum
cleaner onto the charging station. The ap-
pliance will start charging.
The charging process ends automatically
when the appliance is charged.
NOTE
► Switch off the appliance before
putting it onto the charging station.
Otherwise it will start vacuuming
immediately after taking it out of the
charging station.
27