Panasonic CT-27SL13MUG Service Manual page 43

Note:
For additional information about this remote please refer to the owner's manual section remote
operation, listed on the parts list section.
9. Dissasembly for service
Back cover
Remove all the screws marked with an arrow ( ) from the back of the receiver
NOTE
Screw configuration, type, and number of screws vary depending on the model of the receiver
serviced and the application; various models are covered in this manual. Use same hardware
when reassembling the receiver.
- 3 screws at the top edge of the receiver.
- 1 screw by the A/V jacks.
- 1 screw at each lower corner of the receiver.
- 1 screw by the Flyback.
A-Board - Main chassis
15