JVC LT-32DP9BU Instructions Manual page 39

Problem
Change the "Picture Mode" setting. (P. 27)

Unnatural colour >>>

Adjust "Colour" and "Backlight". (P. 27)
Check your "Colour System". (P. 28)
Noise >>> Set to the following functions.

Poor picture quality
Picture Mode: Standard (P. 27)
Super DigiPure: Max (P. 27)
Dull picture >>> Set to the following functions.

Picture Mode: Bright (P. 27)
Super DigiPure: Off (P. 27)
If the top of the image is distorted, check the

video signal quality itself.
Strange picture
If movement appears unnatural when

when using an
receiving a signal from a DVD player etc.,
external device
with 576p (625p), change the output setting
of the external device to 576i (625i).
Adjust "Bass" and "Treble". (P. 28)

If receiving a poor signal in "Stereo/ t·u",

Poor sound switch to "v" (monaural). (P. 28)
Change the broadcasting system using

"Manual Scan". (P. 31)
If you hear both the left and right sound

Left and right sound
from one side of the speaker even after
coming from one
adjusting the speaker balance to one side,
side of the speaker
set "Surround" to "Off". (P. 28)
Actions Problem
It is not a malfunction. Depending on

Some functions do the situation, some function items will be
not work displayed in gray colour and will not work.
(P. 26)
Read the user manual of the connected

device and perform the following:
Check if the output setting of the device is
Æ
Wrong screen size
correct.
Change the signal format of the device to
Æ
other format.
Use the cable marked with HDMI logo.

No picture, no sound
No sound Check if the device is compliant with HDMI.

Wait a little for the signal to stabilise when

Green and distorted
switching the signal format for an HDMI
screen
device.

Troubleshooting
Actions