Advertisement
ON/OFF
MODE
SPEED
TEMP/TIME
Timer on or Timer off mode is used to pre-start or shut off your unit in
advance. Y ou can program this up to 24 hours in advance. Y ou can use the Timer in functions
i.e. COOL, FAN .
Timer on (See Fig. # 5)
Unit must be on to set the timer . Unit will shut down automatically after it accepts the settings in
5 seconds. Use this mode to pre-set the start time of the unit 24 hours in advance.
a) Press TIMER ON , LED display will show "XX" (time set last time) when power is connected first
time, LED display will show "01".
b) Set desired number of hours by pressing the (
hour. If you passed the desired time use the (
c) After set TIMER ON, LED display will show the time. This time displayed:
unit will starts after X hours.
Timer off (See Fig. # 5)
Unit must be running to set the timer off. Use this to preset the time you would like the unit to
shut off.
a) Press TIMER OFF , LED display will show "XX" (time set last time) when power is connected first
time, LED display will show "01".
b) Set desired number by pressing the (
One for each hour . If you passed the desired time, use the (
c) After set TIMER OFF , LED display will show the room temperature about 5 seconds later .
When using the timer the unit will use/revert to the last COOL and fan settings when activated.
The timer must be reset every time you choose to use it.
TIMER
) pad of the T emp/Time buttons, one for each
) pad key to lower the selection.
) pad of the Temp/Time buttons.
) pad key to lower the selection.
11
Advertisement
