Maintenance - Haier AB242ACAAA Operation Manual

MAINTENANCE

[Dismantle and install swing plate ]
3. Install swing plate
Lightly rotate swing plate to insert the ridge at
both ends of the outlet into the groove and then
screw up.
NOTE
For detailed information consult dealer.
Maintenance at the beginning and closing of the applying seaso
1. Check the following items:
No blocks in the inlet /outlet of the indoor/outdoor unit.
Good earthing.
Perfect circuit connection.
If any abnormal cases, consult dealer.
2. Call technician to clean air-filter and shell.
Air-filter must be installed after cleaning.
3. Turn on power
After power turned on, some information on remote controller will display .
1. In fine days, go on with blowing for half a day, to make inner part of conditioner dry.
For details of blowing, see page 10.
2. Turn off power supply.
If power not turned off, conditioner will consume several and dozens of KWH, To turn off power
can save electricity.
After power turned off, information on remote controller will disappear.
3. Call technician clean air-filter and shell.
At the beginning
When not in use for a long time
21