Philips SalonStraight HP4688 Manual page 9

 When you have finished drying each section, set the hairdryer to
the cool setting for a final cool shot. This closes the cuticles and
adds shine to the hair.
Note: Philips SalonPro hairdryers have a lower drying temperature and a
stronger airflow than regular dryers. Thanks to this combination, they dry just
as quickly as regular hairdryers but in a gentler way.
using the appliance
Never leave the appliance unattended when it is plugged in.
Always put the appliance on a heat-resistant surface when it is heating
up and when it is hot.
straightening
Straighteners are powerful styling tools and must always be used with
care.
Always follow the instructions below to select the right heat setting for
your hair type:
- Always select a low heat setting when you use the straightener for
the first time.
- For coarse, curly or hard-to-straighten hair, select a heat setting
between 13 and 25 (155°C-210°C).
- For fine, medium-textured or softly waved hair, select a heat setting
between 1 and 12 (115°C-150°C).
1 Insert the plug into the wall socket.
 Set the on/off switch to 'on'.
The power-on light goes on.
,
The straightening plates heat up rapidly and are ready for use
,
within 60 seconds.
Some condensation may develop on the inside of the window near the
marble plate. This is normal and does not affect the performance of the
appliance.
 Set the heat setting selector to the preferred heat setting
(1-5) (Fig. ).
EnglisH
9