Page 1
Feber ‘Gus’ Caterpillar Assembly Instructions Tools for the job Tool Nuts End attachments Arch supports Pins First pick your shape Next attach the top Click together Locate pin Insert pin and turn to fasten There should be 5 pins all together, including attaching the tail and head pieces Next attach the feet Between each piece there are Tip or lift the caterpillar, insert It’s the same for the head and 2 prongs prongs into the top of the feet tail...
Page 2
Next insert arch supports Insert the green arch supports from Inside the tunnel you use the black tool to attach nuts to the the outside green arch supports (in picture right done, left not done) Finally, secure head, tail and tongue Use end attachments to secure both sides of the use 2 nuts each to secure in place head and tail Use a nut to secure the tongue to the head Double check all fastenings, Then enjoy Feber Gus!