Doosan XXHP1270FCAT Operation And Maintenance Manual
  1. Manuals
  2. Brands
  3. Doosan Manuals
  4. Compressor
  5. XXHP1270FCAT
  6. Operation and maintenance manual
Doosan XXHP1270FCAT Operation And Maintenance Manual

Doosan XXHP1270FCAT Operation And Maintenance Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATION and MAINTENANCE
XXHP1270/XHP1500FCAT-T3 (D58)
This manual contains important safety information.
Do not destroy this manual.
This manual must be available to the personnel who operate and maintain this machine.
Doosan Infracore Portable Power
1293 Glenway Drive
Statesville, N.C. 28625
www.doosanportablepower.com
Book: 46499257 (4-27-2010) Rev A
MANUAL
COMPRESSOR MODEL
Revised (10-12)
Doosan purchased Bobcat Company from Ingersoll-Rand Company in
2007. Any reference to Ingersoll-Rand Company or use of trademarks,
service marks, logos, or other proprietary identifying marks belonging
to Ingersoll-Rand Company in this manual is historical or nominative
in nature, and is not meant to suggest a current affiliation between
Ingersoll-Rand Company and Doosan Company or the products of
either.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XXHP1270FCAT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Doosan XXHP1270FCAT

Summary of Contents for Doosan XXHP1270FCAT

  • Page 1 Ingersoll-Rand Company in this manual is historical or nominative 1293 Glenway Drive in nature, and is not meant to suggest a current affiliation between Statesville, N.C. 28625 Ingersoll-Rand Company and Doosan Company or the products of www.doosanportablepower.com either. Revised (10-12)

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Operating & Maintenance Manual TITLE PAGE FOREWORD ............. . 7 SAFETY .
  • Page 4 TABLE OF CONTENTS Operating & Maintenance Manual TITLE PAGE MAINTENANCE ............43 General Information .
  • Page 5 TABLE OF CONTENTS Operating & Maintenance Manual TITLE PAGE SCHEMATICS............83 Harness System Schematic .

  • Page 7: Foreword

    Foreword Book: 46499257 (4-27-2010) Rev A...
  • Page 8 Operating & Maintenance Manual Foreword Foreword The contents of this manual are considered to be proprietary and confidential to Doosan Infracore Portable Power (herein referred to as “Portable Power”), and should not be reproduced without the prior written permission of Portable Power.
  • Page 9 Foreword Operating & Maintenance Manual This machine should not be used: • For direct or indirect human consumption of the compressed air. • Outside the ambient temperature range specified in the general data section of this manual. • When an actual or foreseeable risk of hazardous levels of flammable gases or vapors exists.
  • Page 10 Operating & Maintenance Manual Foreword Book: 46499257 (4-27-2010) Rev A...

  • Page 11: Safety

    Safety Book: 46499257 (4-27-2010) Rev A...

  • Page 12: General Information

    Operating & Maintenance Manual Safety Safety General Information Never operate unit without first observing all safety warnings and carefully reading the operation and maintenance manual shipped from the factory with this machine. Ensure that the operator reads and understands the decals and consults the manuals before maintenance or operation.

  • Page 13: Compressed Air

    Safety Operating & Maintenance Manual Compressed Air Compressed air can be dangerous if incorrectly handled. Before doing any work on the unit, ensure that all pressure is vented from the system and that the machine cannot be started accidentally. Ensure that the machine is operating at the rated pressure and that the rated pressure is known to all relevant personnel.

  • Page 14: Materials

    Operating & Maintenance Manual Safety WARNING Unrestricted air flow from a hose will result in a whipping motion of the hose which can cause serious injury or death. Safety devices such as hose restraints (whipchecks) must be used to prevent hose whipping if a connection fails.

  • Page 15: Battery

    Safety Operating & Maintenance Manual The following substances are used in the manufacture of this machine and may be hazardous to health if used incorrectly: • anti-freeze • compressor lubricant • engine lubricant • preservative grease • rust preventative • diesel fuel •...

  • Page 16: Radiator

    Operating & Maintenance Manual Safety WARNING Do not attempt to slave start a frozen battery since this may cause it to explode. Exercise extreme caution when using booster battery. To jump battery, connect ends of one booster cable to the positive (+) terminal of each battery. Connect one end of other cable to the negative (-) terminal of the booster battery and other end to a ground connection away from dead battery (to avoid a spark occurring near any explosive gases that may be present).

  • Page 17: Decals

    Safety Operating & Maintenance Manual Decals Decals are located on the machine to point out potential safety hazards. Read and follow these instructions. If you do not understand the instructions, inform your supervisor. Note that there are different decal headings: DANGER (Red Background) Indicates the presence of a hazard which WILL cause serious injury,...
  • Page 18 Operating & Maintenance Manual Safety FREE SAFETY DECALS To promote communication of Safety Warnings on products manufactured by the Portable Power Division in Statesville, N.C. Safety Decals are available free of charge. Safety decals are identified by the decal heading: DANGER, WARNING or CAUTION. Decal part numbers are on the bottom of each decal and are also listed in the compressor’s parts manual.

  • Page 19: General Data

    General Data Book: 46499257 (4-27-2010) Rev A...
  • Page 20 Operating & Maintenance Manual General Data General Data MODELS XXHP1270FCAT XHP1500FCAT Air Delivery - cfm (litres/sec) 1270 (599) 1500 (708) COMPRESSOR Rated Operating Pressure - psi (kPa) 350-500 (2413-3448) 200-350 (1379-2413) ENGINE (Diesel) Manufacturer Caterpillar Caterpillar Model Rated HP at 1850 rpm (kw)
  • Page 21 General Data Operating & Maintenance Manual SERVICE PARTS Part Number Description Where Used Quantity 36860336 ....... Filter, Oil ........Airend ....... 4 46553428 ......Separator, Oil ......Airend ....... 1 36864361 ....... Filter, Inlet Primary ..... Engine & AE inlet ....2 36864379 .......

  • Page 23: Operating Instructions

    Operating Instructions Book: 46499257 (4-27-2010) Rev A...

  • Page 24: Operating Controls And Instruments

    Operating & Maintenance Manual Operating Instructions Operating Instructions E-STOP Operating Controls and Instruments The operating controls and instruments are arranged on the control panel as shown above. A description of each panel device is as follows: 1. Panel Light: Illuminates instrument and control panel. 2.
  • Page 25 Operating Instructions Operating & Maintenance Manual 6. High Engine Coolant Temperature Diagnostic Light: Indicates ALERT or SHUTDOWN due to high engine coolant temperature. 7. Restricted IQ Air Filters Diagnostic Light: Indicates SHUTDOWN due to dirty IQ air filters (if equipped). 8.

  • Page 26: Lifting Unit

    Operating & Maintenance Manual Operating Instructions 25. Engine Oil Pressure Gauge 26. Battery Voltage Gauge 27. High/Low Pressure Selector Switch: Momentary ON/OFF Switch. Allows the user to select between low and high pressure modes. Lifting Unit The central lifting bail allows the unit to be lifted from a single point. Use hoist or crane capable of lifting machine gross weight (see General Data).

  • Page 27: Before Starting

    Operating Instructions Operating & Maintenance Manual WARNING Unrestricted air flow from a hose will result in a whipping motion of the hose which can cause serious injury or death. Safety devices such as hose restraints (whipchecks) must be used to prevent hose whipping if a connection fails.
  • Page 28 Operating & Maintenance Manual Operating Instructions Check engine oil level before starting. The proper level is labeled on the engine dipstick. Add oil when required. Do not overfill. To jump-start, connect the positive booster/charger cable to the 24VDC positive (+) terminal of the battery.

  • Page 29: Starting

    Operating Instructions Operating & Maintenance Manual NOTICE To minimize condensation (water) in the fuel tank, it is recommended to fill the tank at the end of each day. WARNING This machine produces loud noise. Extended exposure to loud noise can cause hearing loss.

  • Page 30: Normal Operation

    Operating & Maintenance Manual Operating Instructions 3. When the keyswitch is turned to “START” the engine starter will be engaged. Do not operate the engine starter motor for more than ten (10) seconds without allowing at least one minute cooling time between start attempts. Extended engine starter engagement will result in starter drop-out and generate a starter engagement time fault.

  • Page 31: Stopping

    Operating Instructions Operating & Maintenance Manual 2. In the Low Pressure (LP) Mode, engine speed varies between 1350 RPM and 1850 RPM while compressor is loaded to match the required volume flow. 3. In the High Pressure (HP) Mode, engine speed varies between 1350 RPM and 1625 RPM while compressor is loaded to match the required volume flow.

  • Page 32: Air Aftercooler System

    Operating & Maintenance Manual Operating Instructions NOTICE Failure to allow turbo cool down prior to stopping can cause turbocharger damage. Air Aftercooler System The optional Aftercooling System is a complete, self-contained system which provides cooler, dryer air than from a standard portable compressor. The system utilizes an integral aftercooler, and a liquid condensate separation system to provide the cool air.

  • Page 33: Aftercooler Operation

    Operating Instructions Operating & Maintenance Manual Aftercooler Operation The compressed air exits the separator tank through the top cover piping, and can then travel along one of two paths, selectable via two-way manual positioned valves. One path allows Standard Operation, which bypasses the aftercooler, and delivers air quality equivalent to a standard oil-flooded portable compressor.

  • Page 34: Weekly Maintenance

    Operating & Maintenance Manual Operating Instructions Weekly Maintenance • Remove Y-strainer screen at the bottom of the moisture separator and clean out any residue. • Verify that the orifice below the Y-strainer is not clogged. • Verify that the piping from the orifice outlet to the exhaust point is not clogged. CAUTION Blockage of the Y-strainer, orifice, or piping can result in flooding of the vessels with condensate.

  • Page 35: Start Pressure Adjustment

    Operating Instructions Operating & Maintenance Manual adjust linkages so that rod (L) contacts the bottom of the air cylinder bore with the rod end bearing (A) securely threaded onto the rod (L). Note: approximately 17mm of thread should be visible on the cylinder rod with the jam nut tightened against the rod end bearing.

  • Page 36: Low Pressure Regulator Adjustment

    Operating & Maintenance Manual Operating Instructions 3. If the pressure exceeds 90 psig; loosen the jam nut (h) and turn the rod (l) 1/4 to 1/2 turn counter clockwise (as viewed from the rod end) to slightly close the butterfly valve, then secure jam nut (h). Open the manual blow down valve slowly to bleed the separator tank pressure down to 60psi and then close the manual blow down valve.
  • Page 37 Operating Instructions Operating & Maintenance Manual The maximum rated pressure for low pressure operation is 350 psig (2413 kPa) at 1850 rpm engine speed. The fully loaded low pressure operation can be adjusted between 200 and 350 psig (1378 to 2413 kPa). Refer to the following illustration for location of the LP regulator and for reference in performing the low pressure requlation set-up.

  • Page 38: High Pressure Regulator Adjustment

    Operating & Maintenance Manual Operating Instructions High Pressure Regulator Adjustment WARNING High pressure air can cause severe injury or death from hot oil and flying parts. Always relieve pressure before removing caps, plugs, covers or other parts from pressurized air system. Ensure that the discharge air pressure gauge reads zero (0) pressure and ensure there is no air discharge when opening the manual blowdown valve.
  • Page 39 Operating Instructions Operating & Maintenance Manual Refer to the following illustration for location of the HP regulator and for reference in performing the high pressure regulation set-up. 1. Start the unit and push the service air switch on the control panel. Observe the discharge pressure on the control panel gage.

  • Page 40: Engine Overspeed Air Shutoff System Option

    Operating & Maintenance Manual Operating Instructions Engine Overspeed Air Shutoff System Option As a standard feature, the engine controller is programmed to stop the engine by shutting off the fuel supply if the engine speed reaches 1950 rpm. An optional feature can be supplied to shut off the air supply to the engine inlet manifold at the same time the fuel is shut off.

  • Page 41: Operation Of The Air Inlet Shutoff Valve

    Operating Instructions Operating & Maintenance Manual Operation of the Air Inlet Shutoff Valve The air inlet shutoff valve will close if the engine speed reaches 1950 rpm in normal operation. After engine shutdown, the Wedge controller will display engine fault code 35 (Engine Overspeed Shutdown).
  • Page 42 Operating & Maintenance Manual Operating Instructions Book: 46499257 (4-27-2010) Rev A...

  • Page 43: Maintenance

    Maintenance Book: 46499257 (4-27-2010) Rev A...

  • Page 44: General Information

    Operating & Maintenance Manual Maintenance Maintenance General Information This section refers to the various components which require periodic maintenance and replacement. The Maintenance Chart indicates the various components' descriptions and the intervals when maintenance has to take place. Oil capacities, etc., can be found in the GENERAL DATA SECTION of this manual.
  • Page 45 Maintenance Operating & Maintenance Manual Prior to attempting any maintenance work on a running machine, ensure that: 1. The work carried out is limited to only those tasks which require the machine to run. 2. The work carried out with safety protection devices disabled or removed is limited to only those tasks which require the machine to be running with safety protection devices disabled or removed.

  • Page 46: Maintenance Schedule

    Operating & Maintenance Manual Maintenance Maintenance Schedule Initial 3 Months 6 Months 500 miles Daily Weekly Months hours 500 hrs. 1000 hrs. /850 km 2000 hrs. Compressor Oil Level Drain Water from Separator Tank Engine Oil Level *Radiator Coolant Level Verify Discharge from Water Sep Drain when in Inspect/clean Aft.
  • Page 47 Maintenance Operating & Maintenance Manual Initial 3 Months 6 Months 500 miles Daily Weekly Months Months hours 500 hrs. 1000 hrs /850 km 2000 hrs 3000 hrs Fuel/Water Separator Element Compressor Oil Filter Element Inspect/replace OTCV Orifice/ screen Compressor Oil Engine Oil Change Engine Oil Filter *Water Pump Grease.

  • Page 48: Protective Shutdown System

    Operating & Maintenance Manual Maintenance 2 Yrs 6 Yrs Safety valve Separator Tank (2) interior *Disregard if not appropriate for this particular machine. D = Drain (1) or 3000 miles/5000km whichever is the sooner G = Grease (2) or as defined by local or national legislation R = Replace C = Check (adjust, clean or replace as necessary) T = Test...

  • Page 49: Oil Temperature Control Valve (Otcv)

    Maintenance Operating & Maintenance Manual Oil Temperature Control Valve (OTCV) Valve must be oriented as shown Torque Nut 4-5 lb ft. Torque Plug 18-20 lb ft. Torque Valve Stem 18-20 lb ft. The Oil Temperature Control Valve (OTCV) requires maintenance at regular intervals to ensure that it can operate effectively.

  • Page 50: Compressor Oil Filter

    Operating & Maintenance Manual Maintenance Servicing the Relief Valve Assembly - if required • Disconnect the harness connector from the installed valve and remove the cap nut holding the solenoid coil onto the cartridge. • Remove the solenoid coil from the cartridge and discard it. •...
  • Page 51 Maintenance Operating & Maintenance Manual Inspection Inspect the oil filter head to be sure the gasket was removed with the oil filter element. Clean the gasket seal area on the oil filter head. CAUTION In more severe applications such as sandblasting, quarry drilling, well drilling, and oil and gas drilling, more frequent service intervals will be required to ensure long component life.

  • Page 52: Compressor Oil Separator Element

    Operating & Maintenance Manual Maintenance Compressor Oil Separator Element Refer to the MAINTENANCE CHART in this section for the recommended servicing intervals. Extreme operating conditions will require more frequent service. If the element has to be replaced, then proceed as follows: Removal WARNING Do not remove the filter(s) without first making sure that the machine is...

  • Page 53: Compressor Oil Cooler, Engine Radiator, And Other Heat Exchangers

    Maintenance Operating & Maintenance Manual Reassembly Thoroughly clean the orifice/drop tube and filter gasket contact area, before reassembly. Install the new element. WARNING Do not remove the staple from the anti-static gasket on the separator element since it serves to ground any possible static build-up. Do not use gasket sealant since this will affect electrical conductance.

  • Page 54: Air Filter Element

    Operating & Maintenance Manual Maintenance WARNING Hot engine coolant and steam can cause injury. When adding coolant or antifreeze solution to the engine radiator, stop the engine at least one minute prior to releasing the radiator filler cap. Using a cloth to protect the hand, slowly release the filler cap, absorbing any released fluid with the cloth.

  • Page 55: Cooling Fan Drive

    Maintenance Operating & Maintenance Manual Reassembly Assemble the new element into the filter housing ensuring that the seal seats properly. Secure element by tightening nut. Before restarting the machine, check that all clamps are tight. Cooling Fan Drive Periodically check that the fan mounting bolts in the fan hub have not loosened. If, for any reason, it becomes necessary to remove the fan or re-tighten the fan mounting bolts, apply a good grade of commercially available thread locking compound to the bolt threads and tighten to the torque value shown in the TORQUE SETTING TABLE later in this section.

  • Page 56: Charge Air Cooler Pipework

    If electrical grease is not present or very minimal, then add a small amount of Doosan Part No. 22409114 electrical grease to the terminals. Dirty and or corroded electrical terminals can be cleaned using electrical contact cleaner.

  • Page 57: Lubrication

    Maintenance Operating & Maintenance Manual Lubrication CAUTION Always check the oil levels before a new machine is put into service. If, for any reason, the unit has been drained, it must be re-filled with new oil before it is put into operation.
  • Page 58 Operating & Maintenance Manual Maintenance NOTICE If the oil is drained immediately after the machine has been running, then most of the sediment will be in suspension and will therefore drain more readily. CAUTION Some oil mixtures are incompatible and result in the formation of varnishes, shellacs or lacquers which may be insoluble.
  • Page 59 Maintenance Operating & Maintenance Manual Torque Values - Dry, non-lubricated threads Book: 46499257 (4-27-2010) Rev A...
  • Page 60 Operating & Maintenance Manual Maintenance TABLE 3 Wheel Torque Chart - Inch Wheel Torque Chart - Metric 1/2” lug nuts Torque (ft-lbs) Torque Torque (n-M) (ft-lbs) 13” Wheel 80-90 15” Wheel 105-115 M12 Bolts 85-95 62-70 16” Wheel 105-115 M14 Bolts 145-155 107-115 16.5”...

  • Page 61: Lubrication

    Lubrication Book: 46499257 (4-27-2010) Rev A...

  • Page 62: General Information

    Operating & Maintenance Manual Lubrication Lubrication General Information Lubrication is an essential part of preventive maintenance, affecting to a great extent the useful life of the unit. Different lubricants are needed and some components in the unit require more frequent lubrication than others. Therefore, it is important that the instructions regarding types of lubricants and the frequency of their application be explicitly followed.
  • Page 63 Lubrication Operating & Maintenance Manual WARNING High pressure air can cause severe injury or death from hot oil and flying parts. Always relieve pressure before removing caps, plugs, covers or other parts from pressurized air system. Ensure that the discharge air pressure gauge reads zero (0) pressure and ensure there is no air discharge when opening the manual blowdown valve.

  • Page 64: Portable Compressor Fluid Chart

    XHP605 XHP1001 Preferred Fluids - Use of these fluids with original Ingersoll Rand/Doosan branded filters can extend airend warranty. Refer to operator’s manual warranty section for details or contact your representative. Preferred Fluids 1 gal. (3.8 Litre) 5 gal. (19.0 Litre) 55 gal. (208.2 Litre) 220 gal. (836 Litre)

  • Page 65: Troubleshooting

    Troubleshooting Book: 46499257 (4-27-2010) Rev A...

  • Page 66: Introduction

    Operating & Maintenance Manual Troubleshooting Troubleshooting Introduction Troubleshooting for a portable air compressor is an organized study of a particular problem or series of problems and a planned method of procedure for investigation and correction. The troubleshooting chart that follows includes some of the problems that an operator may encounter during the operation of a portable compressor.
  • Page 67 Troubleshooting Operating & Maintenance Manual The engine diagnostic fault codes can also be read with the manufacturer's service tool. A service tool connector is mounted on the engine. This connector provides a connection to the J1939 CAN network. For advanced engine troubleshooting, it is recommended that the manufacturer's service tools be used with accompanying service literature.
  • Page 68 Operating & Maintenance Manual Troubleshooting Code Definition Injector Actuation Pressure Signal Erratic/High/Low/Fault Engine Timing Calibration Required Low Engine Oil Pressure Warning/Derate/Shutdown System Voltage Intermittent/Erratic/High/Low Check Programmable Parameters J1939 Data Link Communication High Engine Coolant Temperature Warning/Derate/Shutdown Low Engine Coolant Level Warning/Derate/Shutdown High Fuel Pressure Warning High Inlet Air Temperature Warning/Shutdown High Fuel Temperature Warning/Derate/Shutdown...

  • Page 69: Compressor Diagnostic Display Codes

    Troubleshooting Operating & Maintenance Manual Compressor Diagnostic Display Codes Compressor Malfunction Diagnostic Light ALERT/SHUTDOWN CONDITIONS Alert Shutdown Condition Code Light (Blinks) Code LIght (Steady) Delay (sec). Low Engine Speed Compressor Malfunction High Engine Speed Compressor Malfunction Engine Crank Time Exceeded Compressor Malfunction Engine not responding to throttle...
  • Page 70 Operating & Maintenance Manual Troubleshooting ALERT/SHUTDOWN CONDITIONS Machine ID not Installed Compressor Malfunction Sep. Tank Temp. Sensor Fault (RT1) Compressor Malfunction Reg. Sys. Pressure Sensor Fault (PT2)- Compressor Malfunction ESTOP Activated (EM1) Compressor Malfunction Minimum Start Pressure not met (50 psi) Compressor Malfunction Ambient Temperature Sensor Fault (RT3)
  • Page 71 Troubleshooting Operating & Maintenance Manual Compressor ALERT/SHUTDOWN Diagnostic Lights ALERT SHUTDOWN Diagnostic Light Light Light Delay (Blinks) (Steady) Compressor Malfunction Engine Malfunction Restricted Air Filter Low Battery Voltage Low Engine Oil Pressure 4 sec. (ALERT 18 psi) (SHUTDOWN by Engine ECM) Low Radiator Coolant Level 10 sec.

  • Page 72: Troubleshooting Chart

    Operating & Maintenance Manual Troubleshooting Troubleshooting Chart Bold Headings depict the COMPLAINT - Subheadings suggest the CAUSE NOTE: Subheadings suggest sequence to follow troubleshooting. 1. Unit Shutdown: Corrective Action Out of Fuel Add CLEAN diesel Fuel Compressor Oil Temp. too High See Complaint 6 Engine Water Temp.
  • Page 73 Troubleshooting Operating & Maintenance Manual 4. Low Engine Oil Pressure: Corrective Action Low Oil Level Add oil. Out of Level > 15 degrees Relocate or reposition. Wrong Lube Oil See Engine Oil Spec. Change oil. Clogged Oil Filter Element(s) Replace element(s). Engine Malfunctioning See Trouble Shooting in Engine Manual.
  • Page 74 Operating & Maintenance Manual Troubleshooting 8. Excessive Vibration: Corrective Action Rubber Mounts, Loose or Damaged Tighten or replace. Defective Fan Replace fan. Drive Coupling Defective Replace coupling. Engine Malfunctioning See Troubleshooting in Engine Manual. Airend Malfunctioning See Complaint 7 Engine idle speed too low. See Engine Manual.

  • Page 75: Electrical

    Electrical Book: 46499257 (4-27-2010) Rev A...

  • Page 76: General Information And Operational Theory

    Operating & Maintenance Manual Electrical Electrical General Information and Operational Theory The XHP1450/XXHP1250 machine has an electronic monitor and control system that is used to provide discharge air pressure control and monitor functions. The system uses the WEDGE controller to perform these functions. The electrical system connects all the necessary switches, sensors and transducers to the WEDGE controller in order for it to perform the monitor and control functions.

  • Page 77: Controller Outputs

    Electrical Operating & Maintenance Manual are three wire devices: excitation, signal and ground. Controller Outputs The WEDGE controller has three types of outputs: frequency, pulse width modulated (PWM) and 24 VDC digital (ON /OFF). Digital Inputs and Outputs The WEDGE controller scans digital inputs such as switch contacts. These are either 24 VDC or (0 VDC).

  • Page 78: Electrical System

    Operating & Maintenance Manual Electrical The engine diagnostics connector is located near the engine ECM. This is used to connect the engine manufacturer's service tools to the CAN network. This connector also provides 24 VDC to power these service tools. Electrical System The electrical system consists of the wiring harnesses and associated electrical devices such as relays, switches, lights and solenoids.

  • Page 79: Trouble Shooting Flow Chart

    Electrical Operating & Maintenance Manual Trouble Shooting Flow Chart PROBLEM CHECK LIST Ignition switch (S1) is turned to the “ON” Ensure battery disconnect is ON Check position. Wedge controller does not F5 fuse initialize. Check F8 fuse Check relay K2 operation and connections Check battery voltage WEDGE controller initializes, but there is...
  • Page 80 Operating & Maintenance Manual Electrical Book: 46499257 (4-27-2010) Rev A...

  • Page 81: Schematics

    Schematics Book: 46499257 (4-27-2010) Rev A...

  • Page 82: Harness System Schematic

    Operating & Maintenance Manual Schematics Harness System Schematic Book: 46499257 (4-27-2010) Rev A...

  • Page 83: Wedge To Engine Interface

    Schematics Operating & Maintenance Manual Wedge to Engine Interface Book: 46499257 (4-27-2010) Rev A...

  • Page 84: J1939 Can Buss Communications

    Operating & Maintenance Manual Schematics J1939 CAN BUSS Communications Book: 46499257 (4-27-2010) Rev A...

  • Page 85: System Wiring

    Schematics Operating & Maintenance Manual System Wiring Book: 46499257 (4-27-2010) Rev A...
  • Page 86 Operating & Maintenance Manual Schematics Book: 46499257 (4-27-2010) Rev A...
  • Page 87 Revision History   Rev. EC Number Comments Original release SVC31129...
  • Page 88 Doosan Infracore Portable Power 1293 Glenway Drive Statesville, N.C. 28625 www.doosanportablepower.com ©2009 Doosan Infracore International, Inc. Printed in the USA...

This manual is also suitable for:

Xhp1500fcat

Table of Contents