Doosan 9/270 Operation And Maintenance Manual page 20

If the
If the
CONDITION
Engine Speed < Min. RPM
Engine Speed > Max. RPM
Engine Crank Time Exceeded
High Engine Oil Temperature
High Intake Manifold
Temperature
Water In Fuel
Engine Not Responding To
Throttle command
Too Many Start Attempts
During Autostart
Engine Shut Itself Down:
reason unknown
Low AE Oil Pressure
Disch. Temp (RT2)
Sensor Fault
Sep. Tank Pressure (PT1)
Sensor Fault
Seperator Tank Pressure >20
PSI During Start Attempt
(Engine Will Not Crank)
Machine Over Pressure
Wedge Diagnostic Display Codes
fault indicator lamp is illuminated, refer to the
fault indicator lamp is illuminated, refer to the
ALERT/SHUTDOWN CONDITIONS
ALERT
CODE LIGHT BLINKS
5 CPRSR
Malfunction.
6 CPRSR
Malfunction.
8 CPRSR
Malfunction.
10 CPRSR
Malfunction.
33 CPRSR
Malfunction.
9/270, 9/300, 12/235, 17/235, 21/215, 9/270HA, 9/300HA, 10/300HA, 12/235HA, 17/235HA, 21/215HA
OPERATING INSTRUCTIONS
Alert/Shutdown list below.
Engine diagnostic list below.
CODE LIGHT STEADY
1
2
3
11
29
31
32
34
35
SHUTDOWN
DELAY
(sec)
CPRSR 30
Malfunction.
CPRSR 30
Malfunction.
CPRSR 0
Malfunction.
CPRSR 0
Malfunction.
CPRSR 0
Malfunction.
CPRSR 20
Malfunction.
CPRSR 10
Malfunction.
CPRSR 0
Malfunction.
CPRSR 1
Malfunction.
17