Use And Operation - Duramaxx 10020090 Manual

Use and Operation

Power up
Connect the power cord to the machine (power outlet), then plug it to power source and
turn the switch on; the unit will conduct a self-check by spanning the feeding roller while
the MG and/or UV functions will be automatically turned on by default. The counter display
will show "0" when the unit is ready (the machine is in its normal working condition).
Counting function
Once the bills are correctly placed in the hopper , the machine will start counting automati-
cally. The number of counted bills will be shown on the counter display. Moreover, once the
bills are removed from the stacker, the counter display will clear zero and the batch display
in turn will show the number of counted bills instead.
Bills should be correct placed as indicated in the following steps:
Place the bills between the counting guides as shown in the figure1 and figure2. Swiftly,
push the bills with a figure<see figure3> to make them rest on the top of the hopper plate,
in the correct counting position.
1 2 3
Hopper adjustment
When the counting is not accurate, please
kindly adjust the back screw of the machine.
Turn it in clockwise to fasten the hopper (see
figure 4). Turn it in anti-clockwise to loose
the hopper (see figure 5).
11