Operations; Control Panel - Samsung WW70K4 Series User Manual

Operations

Control panel

01 Cycle Selector
02 Display
03 Temp.
04 Spin
05 Options
06 Delay End
Untitled-8 31
01
Turn the dial to select a cycle.
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
Press to change the water temperature for the current cycle.
Press to change the spinning speed for the current cycle.
• Rinse Hold : The final rinse process is suspended so that
the laundry remains in the water. To unload the laundry, run a
drain or spin process.
• No Spin : The drum does not rotate after the final drain
process.
• Spin Only : To run the Spin Only cycle, press
seconds. When the cycle time and spinning speed appear, press
Spin repeatedly until a desired spinning speed is selected.
Then, press Start/Pause to start the cycle. The spinning time
depends on the selected cycle.
Press to select an option from Super Rinse+, Intensive, and Pre
Wash. Press again to deselect.
• Availability of the options depends on the cycle.
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine's internal logic. For example, this setting is useful
for programming your machine to finish a wash at the time you
normally return home from work.
• Press to choose a preset unit of hours.
02
03 04 05
08
09
06 07
Spin for 3
English 31
2017-05-23 4:46:45