Table of Contents
Advertisement
Available languages
Available languages
EnglisH
10
you have selected. The power-on light turns red to indicate that the
appliance adjusts the setting.
-
The power-on light turns green when the selected heat setting has
been reached.
6
Comb or brush your hair so that it is disentangled and
smooth. (Fig. )
Use a comb to divide the hair into sections. Do not put too much hair in
one section.
Note: Tip: it is better to section off the crown area and to straighten the hair
underneath first, followed by the top area.
7
Take a section that is not wider than 5cm. Place it between the
straightening plates and press the handles of the appliance firmly
together.
8
Slide the straightener down the length of the hair in a few seconds,
from root to hair end, without stopping to prevent
overheating (Fig. ).
9
Repeat this process after 0 seconds until you have achieved the
desired look.
10
Allow your hair to cool down. Do not comb or brush it before it
has cooled down, as this would ruin the hairstyle you have just
created.
Reducing frizz and static electricity
The ioniser inside the hairstyler generates streams of ions that surround
and condition your hair. Ions reduce frizz and static electricity and leave
your hair looking soft, smooth and shiny.
The ioniser starts working as soon as the appliance is switched on.
Cleaning
1
Make sure the appliance is switched off and unplugged.
Let the appliance cool down completely on a heat-resistant surface.
Clean the appliance with a damp cloth.
Advertisement
Table of Contents
