Confirming The Assembling Of The Arm Section - Sony CMT-HPZ7 Service Manual

HCD-HPZ7/HPZ9

2-13. CONFIRMING THE ASSEMBLING OF THE ARM SECTION

2 Check point 1:
The smooth movement of
this part when sliding.
1 Release the lock of the sub slider assy
and slide it in the direction of the arrow.
3 Check point 2:
All the stocker assy is standing.
46
UPPER
SIDE
Note.
If the two parts of the stopper do not touch the stock base (B) when
the sub slider assy is pushed to the end, the phases are not correctly
adjusted. Reassemble the assy.
5 Push the sub slider
assy into the end of
the arm (R).
4 Slide the stocker assy in the
6 Check point 3:
Two parts of the stopper
touch the stock base (B).
stock base (B)
direction of the arrow.