Connecting Power - HP vp6310 User Manual

Connecting power

1.
Place the projector on a stable platform located 1 to 10 m (3 to 33 ft) in front of the screen.
Ideally, the platform should be lower than the bottom of the screen.
2. Connect one end of the power cord to the back of the projector
grounded electrical outlet
3. Turn on the main disconnect switch
If you want to permanently install the projector on the ceiling or behind the screen, see
"Installing the projector" on page 49.
2
.
3
on the back of the projector.
1
and the other end to a
Setting up the projector 19