Philips Steam&Go GC320 Series User Manual page 36

EN The steamer does not
produce any steam.
Water droplets drip from
the steamer head.
The steamer produces a
pumping sound/the handle
The steamer does not
heat up.
CS
36
4239_000_9268_4_DFU-Picture rich_A5_v1.indd 36
The water tank is not in place.
You are holding the steamer upside down,
which makes it impossible for the steamer to
get water from the water tank.
The water tank is not in place.
Water is pumped to the steamer head to be
There is a connection problem.
Let the steamer heat up for approx.
45 seconds before using it.
Press the steam trigger fully.
This steamer is designed to be used in up
right position on hanging garments. Do not
Let the steamer heat up for approx.
45 seconds before using it.
This is normal.
Check if the mains plug is inserted properly
in the wall socket and if the wall socket is
working properly.
bem.
bem.
15/12/14 11:30