Cisco 32369 Manual page 19

client-name
To specify the name of a Dynamic Host Configuration Protocol (DHCP) client, use the
client-name DHCP pool configuration command. The client name should not include the domain
name. Use the no form of this command to remove the client name.
client-name name
no client-name
Syntax Description
name
Defaults
None
Command Modes
DHCP pool configuration
Usage Guidelines
This command first appeared in Cisco IOS Release 12.0(1)T.
Examples
The following example specifies a string client1 that will be the name of the client:
client-name client1
Related Commands
host
ip dhcp pool
Specifies the client's name, using any standard ASCII character. The
client name should not include the domain name. For example, the
name mars should not be specified as mars.cisco.com.
client-name
Cisco IOS DHCP Server 19