1. Einführung / Erste Schritte Vielen Dank für den Kauf des Albrecht DR 882 Digitalradios. Bevor Sie loslegen, stecken Sie den Netzadapter in die DC IN-Buchse auf der Rückseite des Radios und schließen Sie den Adapter an eine Steckdose an.
Page 5
Beschreibung Funktion Um eine einwandfreie Funktion der Fernbedienung zu Infrarot-Sensor gewährleisten, darf der Sensor nicht verdeckt werden. Drehen Sie den Knopf, um die Lautstärke zu ändern, Volume / Mute drücken Sie den Knopf, um stumm zu schalten. Display Zeigt Informationen und die Benutzeroberfläche an. Drehen Sie den Knopf, um Sender zu wechseln und durch Navigate / Enter die Menüs zu navigieren, drücken Sie den Knopf, um die...
4.1. Fernbedienung Taste Beschreibung Drücken Sie die Taste, um das Radio in den Standby-Modus zu versetzen, drücken Sie erneut, um es aufzuwecken.. Mode Wechselt die Betriebsarten. Drücken Sie die Taste, um die verfügbaren Senderinformationen aufzurufen, drücken Sie Menu/Info lange, um das Menü aufzurufen. Drücken Sie diese Taste, um Ihre Favoriten abzurufen, drücken Sie sie lange, um Favoriten zu speichern.
5. Betriebsmodus auswählen Um den Betriebsmodus auszuwählen, drücken Sie die Taste MODE auf dem Gerät oder der Fernbedienung. Sie können den Navigationsknopf oder die Tasten ▲ / ▼ auf der Fernbedienung verwenden, um einen Betriebsmodus auszuwählen. Bestätigen Sie Ihre Wahl durch Drücken des Navigationsknopfes oder der OK-Taste auf der Fernbedienung oder warten Sie einfach kurz.
einen vollständigen Suchlauf durchzuführen, öffnen Sie das Menü durch langes Drücken der INFO / MENU-Taste und wählen Sie die Option „Suchlauf“. Sie können auch die Taste INFO / SCAN am Radio lange drücken, um den Suchlauf direkt zu starten. Wenn die Senderliste leer ist (z.
Pairing-Modus. Um ein Smartphone mit dem Radio zu verbinden, konsultieren Sie das Handbuch Ihres Smartphones und wählen Sie das Gerät „Albrecht DR 882“ aus. Um ein neues Gerät mit dem Radio zu koppeln, trennen Sie zunächst die Verbindung des alten Geräts, indem Sie Bluetooth auf dem Gerät deaktivieren oder die Kopplung mit dem...
Während der Bluetooth-Wiedergabe können Sie die Wiedergabe mit ENTER / OK steuern und durch Drehen des Navigationsknopfes oder mit den Tasten auf der Fernbedienung vor- und zurückspringen. 10. Medien-Modus Wählen Sie den SD-Karten- oder USB-Modus, um Audiodateien von den jeweiligen Speichermedien abzuspielen.
11.2. Uhrzeit und Datum In diesem Menü können Sie die Zeit- und Datumseinstellungen ändern. 11.2.1. Zeit/Datum einstellen Manuelle Einstellung von Uhrzeit und Datum. 11.2.2. Stundensystem einstellen Wählen Sie zwischen 24- und 12-Stunden-Uhr. 11.2.3. Datumsformat einstellen Wählen Sie zwischen den Datumsformaten DD-MM-YYYY, MM-DD-YYYY und YYYY-MM-DD.
11.6. Sprache Verwenden Sie dieses Menü, um die Sprache der Benutzeroberfläche zu ändern. Die folgenden Sprachen sind verfügbar: Englisch, Deutsch, Französisch, Italienisch, Spanisch, Norwegisch, Polnisch, Niederländisch. 11.7. Zurücksetzen auf Werkseinstellungen Wählen Sie diese Option, um das Radio auf die Werkseinstellungen zurückzusetzen. Achtung: Alle Einstellungen, gespeicherten Sender und gekoppelten Bluetooth-Geräte werden gelöscht.
12. Technische Daten Modell Albrecht DR 882 Beschreibung DAB+/UKW/BT Radio Display LCD, 320 x 240 pixel Lautsprecher 2 x 8 Watt 87,5 – 108,0 MHz DAB+ 174 – 240 MHz (Band III) Bluetooth Version 5.0 / Reichweite 10 m Bluetooth Frequenz / Leistung 2,402 –...
14. Fehlerbehebung Problem Abhilfe Radio lässt sich nicht • Vergewissern Sie sich, dass das Radio mit einschalten dem Netzteil verbunden ist und an eine funktionierende Steckdose angeschlossen ist. • Ziehen Sie den Netzadapter vom Radio ab, warten Sie 10 Minuten und stecken Sie ihn dann wieder ein.
Sammelsystem wird von der Industrie finanziert und sichert auch die umweltgerechte Entsorgung und das Recycling wertvoller Rohstoffe. 15.3. Konformitätserklärung Hiermit erklärt Alan Electronics GmbH, dass der Funkanlagentyp Albrecht DR 882 der Richtlinie 2014/53/EU entspricht. Der vollständige Text EU-Konformitätserklärung unter folgenden Internetadresse verfügbar: www.alan-electronics.de...
16. Serviceanschrift und technische Hotline (für in Deutschland verkaufte Geräte) Alan Electronics GmbH Service Daimlerstraße 1g 63303 Dreieich Deutschland Sie erreichen unsere Service-Hotline telefonisch unter +49 (0) 6103 9481 66 (zum Preis für eine Verbindung ins deutsche Festnetz) oder per E-Mail an service@albrecht-midland.de Bevor Sie bei einem Problem ein vermeintlich defektes Gerät zurückschicken, können Sie Zeit und Versandkosten sparen, indem Sie sich per Hotline helfen lassen.
Page 17
DR 882 DAB+ Digital Radio Manual English...
Page 18
Table of Contents 1. First steps ........................19 2. Basic functions ......................19 3. Scope of delivery ......................19 4. Radio controls........................20 4.1. Remote control .......................22 5. Mode selection ......................23 6. DAB radio mode ......................23 6.1. Store and recall favourites ..................23 6.2. Full scan .........................23 6.3.
1. First steps Thanks for purchasing the Albrecht DR 882 digital radio. Before you can start, plug the power adapter into the DC IN socket on the backside of the radio and connect the adapter to a wall outlet at home.
Page 21
Description Function Do not block the sensor to ensure proper function of the Infrared sensor remote. Volume / Mute Turn knob to change Volume, press to mute. Display Displays information and user interface. Turn knob to change stations and navigate menus, press to Navigate / Enter confirm selections.
4.1. Remote control Button Description Press to put radio into standby mode, press again to wake. Press to cycle operating modes. Mode Press to cycle available station information, long Menu/Info press to enter menu. Press to recall favourite stations, long press to save favourites.
5. Mode selection To select the operating mode, press the MODE button on the device / remote. You can use the navigation knob or the ▲ / ▼ buttons on the remote to select an operating mode. Confirm your choice by pressing the navigation knob or OK button on the remote, or by simply waiting shortly.
6.3. Manual tune To manually tune a DAB station, open the menu by long pressing the INFO / MENU button and select the “Manual Tune” option. You can now select the desired DAB ensemble and frequency. This function is recommended only for advanced users. 6.4.
7.3. Audio settings To change the audio settings, open the menu by long pressing the INFO / MENU button and select the “Audio Setting” option. You can now choose between “Stereo” and “Mono”. “Stereo” disregards all mono radio stations while scanning, while “Mono” allows all mono and stereo stations.
11. System settings Various system settings can be found in the menu regardless of the current playback mode. Open the menu by long pressing the INFO / MENU button and use the navigation knob or the ▲ / ▼ buttons to select an option. Confirm your selection with ENTER / OK or use the INFO / MENU button to go back.
11.4. Backlight In this menu you can configure the display backlight in three levels as well as the timeout before the display is dimmed during inactivity. Display dimming is set to off by default. You can also change the display backlight quickly by using the DIMMER button on the remote.
12. Technical data Model number Albrecht DR 882 Description DAB+/FM/BT radio Display LCD, 320 x 240 pixel Speaker power 2 x 8 Watt 87.5 to 108.0 MHz DAB+ 174 – 240 MHz (Band III) Bluetooth Version 5.0 / range 10m Bluetooth frequency / power 2.402 –...
14. Troubleshooting Problem Remedy The device does not switch on • Make sure the radio is connected to the power adapter and plugged into a working outlet. • Unplug the power adapter from the radio, wait for 10 minutes, then plug it back in. No sound or low volume •...
16.1. CE declaration of conformity Standards and directives Alan Electronics GmbH hereby declares that the model DR 882 radio complies with regulation 2014/53/EU. The full text of the EU declaration of conformity can be found at the following Internet address: www.service.alan-electronics.de/CE-Papiere...
Page 31
Radio numérique DAB DR 882 Guide d’utilisation Français...
Page 32
Table des matières 1. Premières étapes ......................33 2. Fonctions de base ......................33 3. Contenu de la boîte .......................33 4. Commandes radio ......................34 4.1. Télécommande ......................36 5. Sélection du mode ......................37 6. Mode radio numérique (DAB) ..................37 6.1. Stockez et accédez à vos favoris ................37 6.2.
1. Premières étapes Merci d'avoir acheté la radio numérique Albrecht DR 882. Avant de commencer, branchez le bloc d’alimentation dans la prise DC IN située derrière la radio et connectez-le ensuite à une prise murale de votre domicile. Déployez complètement l’antenne pour améliorer la réception radio DAB+/FM.
Page 35
N° Description Fonction Pour garantir le bon fonctionnement de la télécommande, Capteur infrarouge évitez de bloquer le capteur. Tournez le bouton pour régler le volume et appuyez dessus Volume / Mute pour couper le son. Écran Affiche les informations et l'interface utilisateur. Tournez le bouton pour changer de station et naviguer Navigate / Enter dans les menus, puis appuyez dessus pour confirmer les...
4.1. Télécommande Bouton Description Appuyez sur ce bouton pour mettre la radio en mode veille et appuyez à nouveau pour la réactiver. Appuyez sur ce bouton pour faire défiler les Mode modes de fonctionnement. Appuyez sur ce bouton pour faire défiler les informations disponibles sur la station Menu/Info et appuyez longuement pour accéder au...
5. Sélection du mode Pour sélectionner le mode de fonctionnement, appuyez sur le bouton MODE de l'appareil / de la télécommande. Vous pouvez utiliser le bouton de navigation ou les boutons ▲ / ▼ de la télécommande pour sélectionner un mode de fonctionnement. Confirmez votre choix en appuyant sur le bouton de navigation ou le bouton OK de la télécommande, ou tout simplement en patientant un instant.
6.2. Balayage complet Si de nouvelles stations DAB sont disponibles (par exemple, après que la radio ait été déplacée), un balayage complet est nécessaire pour les ajouter à la liste des stations. Pour effectuer un balayage complet, ouvrez le menu en appuyant longuement sur le bouton INFO / MENU et en sélectionnant l'option «...
été couplée auparavant, elle passe en mode de couplage. Pour connecter un téléphone à la radio en mode appairage, consultez le manuel de votre téléphone et sélectionnez le dispositif « Albrecht DR 882 ».
Pour coupler un nouveau téléphone à la radio, déconnectez d'abord l'ancien téléphone en désactivant la fonction Bluetooth sur le téléphone ou en supprimant le couplage de la radio dans le menu Bluetooth du téléphone. La radio passe alors à nouveau en mode couplage. Pendant la lecture Bluetooth, vous pouvez contrôler le média à...
11. Réglages système Différents paramètres du système sont disponibles dans le menu, quel que soit le mode de lecture actuel. Ouvrez le menu en appuyant longuement sur le bouton INFO / MENU et utilisez le bouton de navigation ou les boutons ▲ / ▼ pour sélectionner une option. Confirmez votre sélection avec ENTER / OK ou utilisez le bouton INFO / MENU pour revenir en arrière.
11.4. Rétroéclairage Dans ce menu, vous pouvez configurer le rétroéclairage de l'écran sur trois niveaux ainsi que le délai avant la réduction de la luminosité de l’écran en cas d'inactivité. La réduction de la luminosité de l’écran est désactivée par défaut. Vous pouvez également modifier rapidement le rétroéclairage de l'écran en utilisant la touche DIMMER de la télécommande.
12. Caractéristiques techniques Modèle Albrecht DR 882 Description Radio DAB+/FM/BT Display LCD, 320 x 240 pixel Puissance du haut-parleur 2 x 8 Watt 87,5 à 108,0 MHz DAB+ 174 – 240 MHz (Bande III) Bluetooth Version 5.0 / plage de 10 m Fréquence / puissance Bluetooth...
14. Dépannage Problème Suggestion L'appareil ne s'allume pas. • Assurez-vous que la radio est connectée à l'adaptateur d'alimentation et branchée sur une prise de courant qui fonctionne. • Débranchez le bloc d'alimentation de la radio, attendez 10 minutes, puis rebranchez-le. Pas de son ou faible volume •...
16.1. Déclaration de conformité CE Normes et directives Alan Electronics GmbH déclare par la présente que la radio de modèle DR 882 est conforme à la réglementation 2014/53/EU. Le texte intégral de la déclaration de conformité UE est disponible à l’adresse Internet suivante : www.service.alan-electronics.de/CE-Papiere...
Need help?
Do you have a question about the DR 882 and is the answer not in the manual?
Questions and answers