Balzar Beskow B-14 Assembly Instructions

ASSEMBLY INSTRUCTIONS
B-14
COMPONENTS
1 x Tabletop 4 x Leg
20 x M6x20 4 x Cross nut
8 x M6x50 4 x Mounting plate
Required tools: hex key,
flat head screwdriver.
www.balzar.se
Attach the mounting plate to the leg using the cross nut
1
and the M6 bolts. Note that the countersink holes in the
mounting plate and the hole for the cross nut in the leg are
facing the right way. Use a flathead screwdriver to rotate
the cross nut. Use a hex key to screw 2 x M6 bolts, apply
maximum force. Prepare all legs.
Use a hex key to screw 5 x M6 bolts per leg.
3
Apply normal force.
B-14 R B-14
Put the tabletop upside down on a protective cover.
2
Now place the assembled leg in the designated cavity.
Make sure the leg is facing the corner of the tabletop.
Attach all 4 legs and gently turn the table upside down.
4
B-14 OV