Advertisement
Available languages
Available languages
Quick Links
ASSEMBLY INSTRUCTIONS
B-24, B-25, B-26
COMPONENTS
1 x Tabletop
4 x Leg
20 x M6 x 20
4 x M8 x 16
4 x Mounting plate
Required tools: hex key,
adjustable spanner
www.balzar.se
B-24
Attach the mounting plate to the leg using the M8 bolt.
1
Note that the countersink holes in the mounting plate are
facing the right way. Make sure the pin sticking out on the
leg fits the designated cavity in the mounting plate. Use an
adjustable spanner to screw 1 x M8-bolt, apply maximum
force. Prepare all legs.
Use a hex key to screw 5 x M6 bolts per leg.
3
Apply normal force.
B-25
B-26
Put the tabletop upside down on a protective cover.
2
Now place the assembled leg in the designated cavity.
Make sure the leg is facing the corner of the tabletop.
Attach all 4 legs and gently turn the table upside down.
4
B-24
B-25
B-26
Advertisement
Related Manuals for Balzar Beskow B-24
Summary of Contents for Balzar Beskow B-24
- Page 1 ASSEMBLY INSTRUCTIONS B-24, B-25, B-26 B-24 B-25 B-26 B-24 B-25 B-26 COMPONENTS Attach the mounting plate to the leg using the M8 bolt. Put the tabletop upside down on a protective cover. Note that the countersink holes in the mounting plate are Now place the assembled leg in the designated cavity.
- Page 2 MONTERINGSANVISNINGAR B-24, B-25, B-26 B-24 B-25 B-26 B-24 B-25 B-26 KOMPONENTER Montera monteringsplattan med hjälp av M8-skruven. Lägg bordsskivan upp och ner på ett skyddande Notera att hål med försänkning i monteringsplatta är åt rätt underlag. Placera det förberdda benet i den hänvisade håll.
- Page 3 ASSEMBLY INSTRUCTIONS B-24, B-25 WHEEL B-24 B-24 B-25 B-25 Wheel right Wheel left Wheel right Wheel left COMPONENTS Place the inner leg on a flat surface and insert the wheel and Now slide the outer leg over the inner leg. The protruding pin the axle.
- Page 4 MONTERINGSANVISNINGAR B-24, B-25 HJUL B-24 B-24 B-25 B-25 Hjul höger Hjul vänster Hjul höger Hjul vänster KOMPONENTER Placera innerröret på en plan yta och för in hjul och axel. Trä ytterröret på innerröret. Det utstickande stiftet ska in i en av håligheterna i ytterröret, beroende på...