Advertisement
3 Splicing the Optical Fiber and Pre-installed Pigtail
Strip the pigtail.
Install the splice protection tube.
Strip the optical fiber to the fiber core and clean.
Splice the tw o fiber cores:
a) Splice the tw o fiber cores w ith fusion splicer.
b) After the splicing is complete and passes the check,
move the splice protection tube to the splicing point for heat
shrinking.
Splice protection tube
Ф0.25 optical fiber (pigtail)
Insert the splice protection tube into the fixing base of the splicing tray to protect the splicing
point. Coiling-store optical fiber according to the pre-stored routing.
Set tw o splice protection
tubes in each slot
Distribution fiber
Ф0.125 fiber core
Make sure bare fibers are loose after
splicing and fixing so that they do not
snap.
Pigtail fiber
5
Tight buffer fiber
40 mm
Ф0.25 optical fiber
(distribution cable)
Pigtail
Ф0.125 fiber core
Advertisement
