Advertisement
Installation Tools
Marker
Rubber mallet
Splicing tool (splicing machine/
incision knife/cleaning agent)
Installation Procedure
Drilling Installation Holes
Leading in, Stripping, Securing and Coiling the
Distribution Cable
Splicing the Optical Fiber and Pre-installed Pigtail
Installing the Case
1 Drilling Installation Holes
a
a
a
a
Drilling Holes on the Wall
Place the FAT against the w all and align it horizontally
using a level. Then, mark the installation holes.
Level
Stripping tool
Φ10 mm drill bit
Start
Level
Marker
Wall
Installation holes
Long measuring tape
Socket w rench
Hammer drill
Installing, Splicing Pigtail and Drop Cable
Sealing the Case
Checking After the Installation
Drill Φ10 mm holes using a hammer drill. After drilling the
holes, clean up the dust using a vacuum cleaner.
Φ10 mm
drill bit
40 mm
2
Screw drivers
Scissors & Diagonal pliers
Gloves
End
Advertisement
