Additional Functions; A) Hold; B) Automatic Power Off; C) Torch Function - VOLTCRAFT VC131 Operating Instructions Manual

12. Additional functions

Button press:
• Short press = <2 sec.
• Long press = >2 sec.

a) Hold

The hold function keeps the indicated value on the display so you have more time to read or
record it.
If you test live wires, make sure this function is deactivated before the measurement
starts. Otherwise, the measurement will not be correct.
Short press the HOLD button to activate/deactivate the hold.
•
• The symbol will appear to indicate that hold is active.

b) Automatic power off

Automatic power off is an energy saving feature. When activated, the power will turn off if there
is no activity is detected for approximately 15 mins. Press any button or adjust the function dial
to wake.
Disable auto-power off
1
1. Set the function dial to the OFF position.
2. While pressing and holding the HOLD button, turn the function dial to any position.
3. The symbol will disappear.
Activate auto-power off
2
Restart the device by setting the function dial OFF then ON again.
•
• The symbol will show.

c) Torch function

• Press the button to switch the torch ON/OFF.
49