It is also possible to place this heater on a mobile stand (not included, purchased separately). RADtec state-of-the-art infrared heaters use high efficiency heating elements. 95% or more of the electrical power consumed is converted into a heat flux. Infrared heating achieves this efficiency by heating objects in the area without having to heat the surrounding air.
• Wide range of applications • Eco-friendly, safe for humans and animals • Remote controlled • Instant heat • High efficiency • 2-yr warranty • First heater with IP67 certification Characteristics of Torrid Series Models Product ID T6000/12r T6000/18r Controller IRWavelength 1,2 µm 1,2 µm...
6. Connect the heater to a power supply in accordance with local electrical and fire safety requirements. Heater mounting: MountingBracket WingNut Screw Screw Channel Tightening Screws Channel Bracket Finishedmounting hardware Wall installationof the infrared heater Correct position of the heater on a vertical surface (wall) for Torrid series models vertical placement horizontal placement...
Heater Connection Requirements 1. The heater is 220-240 volts. 2. The heater (s) are connected to a separate line with a dedicated circuit breaker with a current cut-off rating corresponding to the power of the heater (s). 3. Consult a licensed electrician for installation. WARNING: Do not use extension cords as they are not designed to power outdoor heaters.
Shipping fees incurred from returns for under-warranty service in the first 30-days will be paid by RADtec. All shipping fees both to and from RADtec following this 30-day period must be paid by the customer. All returns, both during and following the 30-day period, must be affected via the Procedures for Obtaining Warranty Service described below.