HOW TO PUT THE RECEIVER INTO PAIRING MODE (continued)
05 After 10 seconds you will see a
loading screen.
07 When the display screen shows
"SearchingTX", short press the
"Reset" button in turn on the
Receiver and the Transmitter.
We recommend using up to 2 receivers per transmitter, 1 transmitter can support up to 4 receivers. If you
have multiple Receivers that need to pair, repeat the pairing actions in this section from steps 01-08.
*Actual wireless environment may increase or decrease pairing time.
06 After 40 seconds you will see a
Receiver
Transmitter
07 Pairing successful.
10
screen showing "Searching TX".
(Screen picture for example only)